4 Ways To Improve Running Biomechanics

4 Ways To Improve Running Biomechanics

4 Ways To Improve Running Biomechanics

1. Increase knee range of motion during the swing phase. This means that your right knee should be more flexed (towards your butt) when your right thigh is flexed forward during the run, as opposed to your right knee being more extended (away from butt).Same goes for the left, of course. Think of it this way - if you were swinging a weight attached to the end of a stick, you could move the weight faster with less effort if the stick were shorter. In this case, the stick is your leg, and the weight is your foot. By having your knee (the stick) more bent (or shorter), you are able to move the weight (your foot) much faster with less effort. The result will not only be a faster swing time (meaning a faster foot turnover), but also reduced fatigue in achieving the desired stride length.Drill: Heel-to-butt kicks. During your normal run, begin to exaggerate knee flexion, touching the butt with the heel during each stride. Do 20 touches for both the right and left legs, then continue in your normal gait pattern.2. Maintain flexible quadriceps and hip flexors. These are the muscles along the front of your thigh that act to straighten the leg. If they are tight, insufficient flexibility can inhibit your ability to fully extend the leg in the push-off phase of the running gait.Drill: Platform stretch. Ideally, your pelvic bone should be tilted backwards when stretching the quadriceps and hip flexors. To achieve this, find a platform or elevated surface that is approximately at knee height or slightly higher. Facing away from the platform, and standing on your right leg, bend your left knee and lock your left foot, shoelaces down, onto the surface. Hold 15-30 seconds, then switch.3. Deliberately focus on pushing backwards with each step. This will not only incorporate your gluteal and hamstring muscles in the push-off phase of the running gait, but also keep your center of gravity consistently rolling forward. Rather than focusing on using the muscles around the knee to provide the driving force, focus on running from the hips.Drill: Lean-fall-run. Stand completely still and as tall as possible. Without bending the knees, let the entire body lean forward until you "fall" toward the ground and are forced to take your first step forward.Transition directly into a short 10-20 yard run, continuing to lean forward and push backwards with the hips.4. Avoid excessive ankle and hip flexion. Do not bend your knees or flex your ankles excessively during the landing phase. While it may seem that this decreases joint impact forces, there is no empirical evidence that runners who bend the knees more have less injuries than runners who do not. However, there is evidence of increased time spent in contact with the ground, which decreases your elastic rebound from the ground and the overall power of each stride. You will naturally avoid excessive knee and ankle flexion if your focus on minimizing footstrike time.Drill: Cadence counts. During your run, count the number of right footstrikes achieved in a span of 20 seconds. There should be 30 or more, indicating a cadence of 90 or higher. Increased cadence indicates decreased ground contact time.

POST COMMENT

Bishop Bernard Jordan And His Prophetic Ministry The Important Features of Men's Running Shoes The Running Shoes Which Ought To Be Proper Running Watches Can Suit Anyone Top Motion Control Running Shoes for Mens Feet Discount Air Jordan Shoes What You Should Realize About Running Shoes Finding The Best Running Shoes For Comfort Chiropractic Help for Running? Classification of Running Shoes Smooth Running With Reflective Running Gear Where to Get Mizuno Trail Running Shoes Cheap Where to Get Big Discounts on Running Gear for Cold Weather