About Floor Coatings And Concrete Surface Preparations

Most of us would think that achieving a clean

, beautiful, and damage resistant epoxy floor is close to impossible. It is perceived to be a major problem that cannot be resolved and costs a ton of dollars. What most people miss is that in order to obtain the ideal epoxy floor, complete and effective surface preparation must be done. This step will ensure that we get optimum results with our epoxy and concrete flooring.

Flooring and coating companies or contractors need to go through necessary steps to deliver a perfect, damage resistant flooring. Besides doing the usual crack and joint repair, surface preparation also calls for the use of a variety of techniques, such as using bead blasting systems and bead blasting equipment to leave your floor looking clean and professional. This is where different floor coatings come into play. As clients, we also need to educate ourselves with these techniques so we could better understand how we can achieve the kind of flooring we want.

Concrete flooring and surface preparation specialists are the experts we need if we are looking for shot blasting in North California or bead blasting in North California. How is this related to getting our well-made epoxy floors? Bead blasting, shot blasting, diamond grind are just some of the techniques in floor preparation for epoxy coatings, overlays, and seals. Let us learn more about these different techniques.

What is Shot Blasting?

Shot blasting uses the process of blasting a concrete surface with steel shot (small steel balls) at a high velocity. By doing this process, contamination and laitance (soft concrete) are removes, thus revealing a mechanical profile for improved bonding. The concrete dust is recovered by a powerful dust collection system.

A notable advantage of shot blasting is its ability to eliminate the use of harsh, non-eco friendly chemicals and leaves the concrete floor with the desired profile. It also lends itself to efficient disposal of dust and other contaminants.

Shot blasting can be accomplished with ride-on, diesel-powered machines or walk-behind, electric powered machines and can be performed indoors or outdoors.

What is Diamond Grinding?

Diamond grinding is a method for removing thin coatings and mastics and smoothing out surfaces on concrete. It will clean and abrade as well as leave the substrates smooth. Diamond Grinding is perfect for preparing the substrate for very thin applications and sealers and is suitable for interior and exterior floors.

Advantages include: reduced floor/road noise, enhanced surface texture and skid resistance, and it can be accomplished during off-peak hours without having to close all your lanes or floor areas.

What is Bead Blasting?

Bead Blasting is the process of removing surface deposits by applying fine glass beads at a high pressure without damaging the surface. This is used to clean calcium deposits from pool tiles or any other surfaces, and removes embedded fungus and brighten grout color.

Advantages include: A consistent finish time and time again; no acid weeping from joints and the inside of box sections leaving unsightly streaking and contamination on the finished surface; and no impingement of ferrous contamination into the surface.

by: nathanhilson

POST COMMENT

Find Cheap Jewelry Like Necklaces And Earrings Online For Less Resume Writing: How To Select The Best Format And Method For Personalized And Unbiased 401k Allocation Advice, Choose 401 Harmony Why Choose Top Green Web Hosting Companies And Not Regular Hosts? Welcome The Oak Bedroom And Dining Room Furniture In Your Home Botswana Travel: What To Do And Where To Go Natural Skin Care And Barriers 8" Open Frame Industrial Displays And Applications Seniors And Oral Health- Custom Denture Care Norcross Dentist Reaches Out To Patients Through Social Media And Blog Effective Substance Use And Abuse Rehabilitation Solutions What Are Low Tack Protective Tapes And Why Would You Need Them? Living In Panama And Traveling The Americas