Activation of chemicals within the battery to maximize battery performance

To activate the battery processing method: Battery laptop battery

Activation of chemicals within the battery to maximize battery performance, need to repeat the charge and discharge the battery (fully charged and then fully discharge) three times. The so-called fully charge and discharge is: normal battery power so the battery power to 3% (preferably once depleted, can be divided into several times to power, but not interval too long), and then must immediately shut down the battery charge twelve hours.

This emphasized the need to charge the battery once, because the battery will be carried out even without using the self-discharge, and 3% when the battery power consumption at this time if the battery charge time, very vulnerable to the phenomenon of self-discharge the battery over-discharge at the expense of battery, over discharge lithium batteries is a major taboo.

Processing charge the battery when activated, the machine must be at the off. If the machine at this time to wait, pending other state, when the charge to a 3 to 4 hours after the green power indicator is no longer beating, the machine will automatically stop charging the battery, so can not fully charge the battery. To 3% when the discharge power, the machine will automatically go to sleep right away, and you should restart the machine, the machine starts the process off the bottom left of the screen, click the button to make the machine shutdown.

If all of these operations a good grasp of detail and the quality of your battery and no problems, can be a good chemical activation of the battery to maximize battery performance, basically the normal battery after each use can charge to 100%.

Activation of chemicals within the battery to maximize battery performance, need to repeat the charge and discharge the battery (fully charged and then fully discharge) three times. The so-called fully charge and discharge is: normal battery power so the battery power to 3% (preferably once depleted, can be divided into several times to power, but not interval too long), and then must immediately shut down the battery charge twelve hours.

This emphasized the need to charge the battery once, because the battery will be carried out even without using the self-discharge, and 3% when the battery power consumption at this time if the battery charge time, very vulnerable to the phenomenon of self-discharge the battery over-discharge at the expense of battery, over discharge lithium batteries is a major taboo.

Processing charge the battery when activated, the machine must be at the off. If the machine at this time to wait, pending other state, when the charge to a 3 to 4 hours after the green power indicator is no longer beating, the machine will automatically stop charging the battery, so can not fully charge the battery. To 3% when the discharge power, the machine will automatically go to sleep right away, and you should restart the machine, the machine starts the process off the bottom left of the screen, click the button to make the machine shutdown.

If all of these operations a good grasp of detail and the quality of your battery and no problems, can be a good chemical activation of the battery to maximize battery performance, basically the normal battery after each use can charge to 100%.

Activation of chemicals within the battery to maximize battery performance

By: combattery84

POST COMMENT