Affixing Embroidered Patches To Leather

Embroidered patches are something that have existed for hundreds of years; in point of fact they can be dated back to ancient Asian times

. Even so , it is only recently that we have been able to attach them to our clothing using heat activated glue and a hot iron. With today's patches you can readily apply them on most fabrics without ever needing a needle and thread. Fortunately the ability to affix them with a hot iron means that your fingers will not get sore and it is much easier and quicker to do. But the only problem with this method is that the patches can't be ironed on to leather clothing - at least, not in the traditional sense.

Leather Does Not Do So Well With Hot Temperatures

In regards to attaching embroidered patches to clothing with a hot iron, what you are actually doing is heating up the glue on the back of the patch until it gets quite soft. It is essential to apply a lot of heat in order to get the glue to the required consistency and the issue is that applying this much heat to leather could damage it.

Although leather is quite durable, too much heat will damage the surface of it. This means there's two problems here. The first problem is the fact that when the leather is damaged, the glue are not going to stick to it and then the patch will fall off. Another problem is that the leather will look ugly and scorched as soon as the patch does fall off. There is other materials like faux leather and vinyl that will also have these issues. Another thing to consider is that even if you might find a way to make the glue adhere, one slip of the iron that brings in contact with bare leather will leave a burn mark. So it is never a good idea to use a hot iron anywhere near your leather goods.

Is There Another Way?

Earlier we mentioned that attaching iron on patches to leather was difficult in the traditional sense. When we said you can't iron on patches to leather in the traditional sense we meant that there's a non-traditional way to do it. It involves a specialized glue and an unheated iron. Yes, a cold iron. You're only going to be using your iron to press the patch on.

You'll need that special glue in order to make this work; not just any glue will be suitable, as leather is a very difficult substance to work with. In order to find this special glue, you will have to look at sewing shops, craft fairs or a high end leather goods store. You need to make sure that you read the instructions carefully before you buy to double check that it can be used on leather. Otherwise you might possibly be flushing your hard earned cash down the toilet.

The glue needs to be applied to the back of the patch as per the instructions on the bottle and then you should carefully place the patch onto the part of the leather where you want it. Next, use the cooled iron to press down firmly and hold the patch in place for the amount of time indicated by the instructions. Once the glue has set-up you'll be able to release the iron and let the patch dry. It's Recommended To know for certain where you want the patch to be before you lay it down. Once you might have placed the patch on the leather, you can not remove it or you will be left with a stain.

by: kenta0scha

POST COMMENT

5 Things Not To Miss In The Northern Vietnam 5 Things Not To Miss In Northwest Vietnam 5 Things Not To Miss In The Center Vietnam Stop Your Biological Clock Learn How To Set Up Your Place With Declutter Fast Making Refurbished Laptops Your Preference The Actual Nature Of Addiction Visual Merchandising With Display Shelving & Mystery Shoppers Would You Buy A Tube Amp Or Solid State Amp Frozen Shrimp That Is Prepared At Sea Remains Fresh For Months Gcse Math Get Important Tips To Improve Your Grade How To Look Best On This Christmas Cash Paid Surveys How To Get Started