Attach Hardware To Glass Tile

The glass tiles can be a beautiful addition to any room

. Home from the kitchen again to the walls of the bathroom, tiling, glass, able to complete the search for Decoration of the work in progress. However, when it comes to add devices on the glass tiles, and rejects many homeowners. Drilling glass tile seems foolhardy effort, but in fact, connect devices for the court of glass is a common and relatively safe. It simply requires the right equipment and technology.

Holes in the glass

Large holes

When you try to make large holes for pipes in your tiling, you should use diamond core bit. When you use a diamond core bit, it is absolutely crucial that you are often a little cold water. Professional Installation will typically invest in a water jacket for a bit, but if you're not going to be in many cases, to drill the glass tile to others, or will be drilling only slightly, and jacket water is not necessary.

Small holes

To dig small holes, do not need to use a little diamond. Must be made on tile stand and perpendicular to the drilling. You can accomplish this through a campaign usually tiles in place. Despite the cooling water is not necessary, as is the case with diamond bit, be sure to keep the bit lubricated with water or oil, turpentine. To avoid rough edges on the side out of the hole drilled in the middle of the road, through the side in 1, and then finish drilling through the opposite side.

Anchored games

Anchored to put on the tiles with combinations of drilling, must make the first hole in the tiles. It should be this hole is 3 mm wider than your nails anchoring. The idea is to keep anything from touching the tiles attach directly, and if the fixture touches your tiles directly, you risk tension undue access to court and shorten the life of them.

There is no doubt that the digging slowly, regardless of what kind of hole you are trying to make, so you do not prematurely age drilling. In addition, wear protective clothing and always had an eye, such as goggles, to avoid injury to your eyes.

Although it is possible to drill tiles already attached, it is much easier to drill before, so you should make an effort to dig up all you need to be drilled before installing the tiles.

Adhesion on the glass

When gluing anything on the glass, tiles, it is necessary to use a specific kind of the glue. Organic glue is not suitable for tiling either glass paste on the surface or to connect equipment for tiling glass. However, in a situation where you have no choice but to use glue with glass tiles, there are brands available that have been made of glue on the bonds of some glass materials. Many of these glues, especially those that dry and clear, and will require special conditions for drying, so be sure to read carefully any instructions on the glue you decide to buy. For example, UV glass glue requires sunlight to bond properly.

Be cautious that you choose the appropriate glue for your project. Mastic, although good for the manufacture of glass and mosaic tiling, is not suitable to connect devices to the tiling or glass to connect the glass tile wall.

Can always be sure to use the proper amount of glue. If you are prone to use excessive amounts, will be magnified this problem when you are working with glass tiles. You can end up with ugly globs of paint on the equipment your tiles, your work will look unprofessional and ugly.

by: Umar

Attach Hardware To Glass Tile

The glass tiles can be a beautiful addition to any room

Contact

www.yloan.com

Products

Our Solutions

Press Room

Resources