Boring Machines

Boring Machines

Boring Machines

In machining, boring is the process of enlarging a hole that has already been drilled (or cast), by means of a single-point cutting tool (or of a boring head containing several such tools), for example as in boring a cannon barrel. Boring is used to achieve greater accuracy of the diameter of a hole, and can be used to cut a tapered hole.

There are various types of boring. The boring bar may be supported on both ends (which only works if the existing hole is a through hole), or it may be supported at one end. Lineboring (line boring, line-boring) implies the former. Backboring (back boring, back-boring) is the process of reaching through an existing hole and then boring on the "back" side of the workpiece (relative to the machine headstock).

The boring process can be executed on various machine tools, including (1) general-purpose or universal machines, such as lathes (/turning centers) or milling machines (/machining centers), and (2) machines designed to specialize in boring as a primary function, such as jig borers and boring machines or boring mills, which include vertical boring mills (workpiece rotates around a vertical axis while boring bar/head moves linearly; essentially a vertical lathe) and horizontal boring mills (workpiece sits on a table while the boring bar rotates around a horizontal axis; essentially a specialized horizontal milling machine).

The dimensions between the piece and the tool bit can be changed about two axes to cut both vertically and horizontally into the internal surface. The cutting tool is usually single point, made of M2 and M3 high-speed steel or P10 and P01 carbide. A tapered hole can also be made by swiveling the head.

Boring machines come in a large variety of sizes and styles. Boring operations on small workpieces can be carried out on a lathe while larger workpieces are machined on boring mills. Workpieces are commonly 1 to 4 meters (3 ft 3 in to 13 ft 1 in) in diameter, but can be as large as 20 m (66 ft). Power requirements can be as much as 200 horsepower (150 kW). Cooling of the bores is done through a hollow passageway through the boring bar where coolant can flow freely. Tungsten-alloy disks are sealed in the bar to counteract vibration and chatter during boring. The control systems can be computer-based, allowing for automation and increased consistency.

Because boring is meant to decrease the product tolerances on pre-existing holes, several design considerations must be made. First, large length-to-bore-diameters are not preferred due to cutting tool deflection. Next, through holes are preferred over blind holes (holes that do not traverse the thickness of the work piece). Interrupted internal working surfaceswhere the cutting tool and surface have discontinuous contactshould be avoided. The boring bar is the protruding arm of the machine that holds cutting tool(s), and must be very rigid.

Various fixed cycles for boring are available in CNC controls. For mills, these are called using G-codes such as G76, G85, G86, G87, G88, G89, and other codes specific to particular control builders or machine tool builders.

For more information on Boring Machines you can visit http://www.homag-india.com/

POST COMMENT

Drilling Machines HTC Desire HD : Fulfilling Your DESIRE Importance of Having Building Inspection Planning for Wealth Creation How To Manage Your Wealth Avoid Bad Shot with Most Confident Ways Fisher Metal Detectors A Cure For Fatigue LED TVs: 5 myth-busting facts you need to know Locked up – Solved out in Half an hour! Keratoconus What To Do When You Are Diagnosed How to convert MP4 to FLV What Is The Forte Of The Voice Actors: Their Special Voice Talent