Common Safety And Fire Risks Faulty Wiring And Appliances Represent

Faulty appliances

Faulty appliances

Damaged power leads or plugs on appliances, appliances that have come in contact with water and appliances that have faulty wiring all pose fire and safety risks. Electric shock is the most common hazard associated with these problems but fire may also be a risk. When a faulty appliance is being used, it is possible that the user could come into contact with exposed wires, or electrical current causing electric shock. Leaving a faulty appliance plugged in and unattended could also result in fire. To minimise these risks, install a safety switch in your home or use a portable one. Always unplug appliances not in use or turn off the power at the socket. This also saves on your power bill. If you have any concerns about a particular appliance, have a licensed electrician check it over. Always check power leads for fraying and damage and never let them come into contact with potential dangers such as cooking utensils and light bulbs. Cords should never be covered by rugs or furniture and should be secured. Do not leave appliances such as dryers running at night and replace any appliance that has an unusual odour, or is not functioning properly.

Faulty Wiring

Faulty wiring is one of the most common causes of house fires. When buying a house check that the kitchen and bathroom wiring includes ground fault circuit interrupters and that bedrooms are fitted with arc fault circuit interrupters. This will minimise fire risks. Houses that are more than a few decades old should have their electrical systems inspected by a professional to ensure old wiring is not worn out and dangerous. In some cases wiring may need to be replaced or upgraded. Faulty wiring also poses the threat of electric shock. Flicking a light switch or plugging in an electrical lead can cause electrocution if there is a problem with the wiring. Overloading power outlets is another common fire and safety risk in the home. Wherever possible do not use double adaptors, particularly with larger appliances such as TVs, refrigerators and dryers. If using a power board, make sure it is one with an overload protection switch.

Minimise Fire and Safety Risks

Check power cords for fraying, cracks and damage.

Replace or repair any appliances that are visibly damaged or omitting a strange smell when used.

Ensure a safety switch is installed in your home, or use portable ones.

Never overload power outlets.

Use power boards with overload protection.

Have old wiring looked over by an electrician and replaced if necessary.

Unplug or turn off appliances at the outlet when not in use.

Install circuit interrupters.

Using common sense, simple safety devices and professional advice will ensure safety and fire risks are minimised in your home. Contact an electrician for an electrical safety assessment of your home.

by:micca

POST COMMENT

Hd Bathroom Spy Camera Bathroom Spy Radio With Mirror Hidden Motion Detection Dvr 16gb Are You Licensed To Fly With Mcafee Safety-belt Factors Determining A Top Notch Electronic Component Distributor Radio Advertising A New Dimension To Explore Radio Advertising Campaign A Planned Entity Nanotechnology Spurring Growth Of Electronics Industry Globally Purchasing Through A Genuine Electronic Parts Supplier Mining Industry Should Improve Safety Index Pc Forensic Examiner Uncovers Electronic Proof Of Criminal Exercise About Radioactive Iodine Treatment For Graves Disease Brake Rotors - Ensure Safety Of Your Vehicle Work Safety Is No Small Matter Ard The Safety Of Miners Is Great Invent