Copper Ore Flotation Machine

Description of Copper Ore Flotation Machine

Our Flotation Machine is the latest design to use the circular tank concept and combines the benefits of circular cells with the unique features of the Minerals mechanism to create the ideal conditions to maximize floatation performance for all roughing, cleaning and scavenging duties, which can be used to separate nonferrous metal, ferrous metal, noble metal, nonmetallic mine, chemical material and recycle mine. It features: High inhalation, low power. Each chute can inhale gas, sink magma, separate. There is no need of accessory equipments horizontal equipment. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface. It is easy to adjust. The upward one makes the magma cycle toward upward, which the downward one makes the magma cycle downward.

Application of Copper Ore Flotation Machine:

Flotation machine is applicable for the separation of nonferrous metal and ferrous metal. It is also used for separating nonmetal, such as fluorite and talcum.

The impellers are driven through V- belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; On the other hand it stirs ore slurry and mix with medication to form the mineralized froth. By adjusting the height of flashboard to control the liquid level and make the useful froth scraped by loam board.

The working principle of Copper Ore flotation machine

When flotation machine works, slurry is inhaled from the bottom of the trough to the space between impellers. Meanwhile, the low-pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re_mis with air. The remained slurry flows to the next trough until becomes residue.

Operating instruction:

To check the bolts before starting the machine and to use hand instead of impellers to prevent the sediment from adding the burden of electromotor. To adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should have a distance and should be changed when they are worn. The bearing in the pump should be maintained every three months.

by: zgxzenith

POST COMMENT

An Unlikely Use For A Rare Earth Metal Tips To Organise Charity Balls At Ball Venues In London A Foldable Or Collapsible Warning Triangle For Motor Vehicles Is Already Known Which Find Several Reasons For Moving To Arizona The Right Trucking Methods For Your Company Become An Authentic Alcohol Vendor With Alcohol Personal Licence Kausani Dcouvrez Le Prau Nouvelle Gnration ! Best Property For Sale, Purchase In Gujarat, Ahmadabad Guide To Purchase The Right Original Fine Art Paintings Why You Should Choose Bobcat Attachments Get The Most Suitable Mortgage Rates With The Help Of Mortgage Brokers Derniers Modles De Vtements De Sport Pour Femmes