It acts like resistors and so are used in the LEDs and neon bulb.
the electronic ballasts are not used for the high power installation for its varying resistance in complexity and it depends on the capacitors and capacitive action of the inductors. Most of the ballasts are remote controlled and come with digital technology to be used in fluorescent lamps. the overall current load is stabilized with the help of ballasts. In order to stabilize the circuit the ballast draw power from high voltage supply and distributes it to correct level with the negative supply of current flow. By deriving positive resistance, the ballasts limit the supply of current and a good example would be the gas discharge lamp.
The concept is more based on the reduction of current to increase the voltage drop. the voltage drop level is regulated in order to bring the positive circuit from the negative resistant of current supply is done by the automobile ignitions in the ballasts. the case of LEDs do not have any controls over the current consumptions from the sources of high voltages and they are the devices reacting positively. the use of electronic ballasts for regulating the current flow and stabilize mode of connection for LEDs are emphasized by light emitting diodes or LEDs. The simple resistive ballasts are used in the light emitting diodes as they are found good for distributing power.
the solid state ignitions are taken by the ballasts for a good functioning of electrical devices like lamps and fluorescents tubes. the ballasts improve the ideal reactance that is required in order to regulate the current limit for the electrical devices as many lamps are operating at higher efficiency at about 9% rate that what is estimated of 10KHZ. the capacitors with electrical ballast in the higher resistance provides an optimum utilization of current.
With the remote operation the electronic ballasts work on SMPS modules and regulate the high frequency current supply. For conserving energy maximum possible the superior lighting quality is offered by them. Long life is provided to lamps and tubes for an efficient operation performance. for various needs of commercial and home purposes they have different lighting models that are cost effective. They help regulating safety in outdoor and indoor environment with the improved and versatile performance of the electronic ballasts.