Fixings 101: The Basics Of Wood Screws
Wood screws are important through bolts used in carpentry
. The use of these through bolts is mainly to join two pieces of wood together to increase the thickness of the wood and so that the strength of these two pieces would be added together.
There are many types of wood screws and they are classified in four ways: the type of drive, the shape of the head, the shank of the screw, and the size of the screw. Each kind of wood screw serves its own purpose.
Wood Screw Fixings by Drives
When we talk about wood screws and classify them by the type of drive that they have, we would be talking of only two things. One is the slotted drive type of wood screw, whilst the other would be the Philips type of drive.
The slotted drive type has a single hollow bar straight across the head of the screw. The Philips drive, on the other hand, has a cross-shaped slot on its head. Because of the shape of this slot, the Philips drive is also called the crosshead drive.
A variation of the Philips drive is the Pozidrive screw. Like the Philips drive, the Pozidrive also has a crosshead, but on all the angles created by this cross, a tiny corner juts out.
Wood Screw Fixings by Heads
We can also classify wood screws according to the shape of their head. Under this classification, there are three types of wood screws countersunk heads, raised heads and round heads.
Wood screws with countersunk heads are made for concealment. They are screwed tightly into the surface of the wood, where they can appear invisible. The raised head wood screw is also good for concealment but they are not as invisible as the countersunk-headed wood screws. That is because the raised head is slightly domed and can be seen on the wood.
The round-headed wood screw, on the other hand, is not meant to be invisible. Its large head rests in a dome right on the surface of the wood.
Wood Screw Fixings by Shanks
The shank of the wood screw refers to its tapering tail. All wood screws, regardless of their classification, have only one single appearance to their shanks they are tapered. This tapering shank differentiates wood screws from screws used on metal. Screws for metal surfaces always have parallel shanks.
Wood Screw Fixings by the Size
Wood screws are also classified according to their sizes. These sizes are determined by the length of the screw and its gauge number. The length of the screw can be measured easily all you need to do is to apply a ruler and measure its length from head to tip.
Getting the gauge number of a wood screw is another matter. If you do not know the gauge of the wood screw through bolts that you need, then you may need to do a bit of math. Put a ruler to the diameter of the wood screws head and convert that measurement to the sixteenth of an inch. Subtract one, and then multiply the remainder by two. Whatever number you will get will yield these fixings gauge numbers.
by: craigcoates
online work at home jobs work at home online work at home online Now Your Dining Room Won't Let You Have Your Food Elsewhere Fabulous Remodeling Possibilities With A Folsom Electrician legitimate work at home opportunities work online at home work at home for free real work at home jobs Winter Home Health Check at home work - Easy money Zicom Provides Safest Security In India free work at home