Welcome to YLOAN.COM
yloan.com » Motorcycles » Honda Integra
Auto & Trucks Mobile-Audio-Video Motorcycles Trucks toyota

Honda Integra

Honda Integra

Honda Integra

First generation (19861989)

First generation

Production

19851989

Body style(s)

3-door hatchback

5-door hatchback

4-door sedan

Engine(s)

1.5L EW

1.6L ZC

Transmission(s)

5-speed manual

4-speed automatic

Wheelbase

3-door: 2,450mm (96.5in)

5-door: 2,520mm (99.2in)

Length

3-door: 4,285mm (168.7in)

5-door4,355mm (171.5in)

Width

1,665mm (65.6in)

Height

1,290mm (50.8in)

Fuel capacity

13.2USgallons (50.0L; 11.0imp gal)

Related

Honda Civic

Honda CR-X

AV, DA1-DA3

This vehicle debuted in America in 1985 as the Honda Quint Integra before going on sale a year later in North America as part of the then-new Acura lineup. Three and five-door hatchback and four-door saloon bodies were available, with a 1.6L DOHC 16-valve four-cylinder engine powering both. The engine was the vehicle's most publicized feature, as DOHC, multi-valve engines were anything but commonplace in entry-level models at the time. The 5-door hatchback model was also sold in Australia but was rebadged as the Rover 416i.

The Integra was based on the less-sporty Civic, although it featured a small list of key upgrades over its lesser stablemate to help merit a price increase over the CRX Si, which was otherwise the sportiest compact vehicle being offered by Honda/Acura; enlarged 4-wheel disc brakes replaced the small front-disc/rear-drum setup used by the Civic and CRX, suspension calibration was re-worked, better tires were used and a 113 hp DOHC fuel injected 16-valve engine was used in place of the SOHC unit from the CRX Si. Combined with sleeker styling and a nicer interior, buyers were effectively convinced that the Integra was worth the extra money, and nearly 228,000 units were sold during the four year run of the first generation model.

The first generation Integras actually came with two different engines. Although they shared the same engine code (D16A1), there were a few differences. The engine differed in the years 1986 to 1987 and 1988 to 1989. The two engines are commonly called the "Browntop" and "Blacktop" due to the color of their valve covers. The "browntop" came in 1986 and 1987 Integras while the "blacktop" came in 1988 and 1989 models. The improvements in the "blacktop" engine included lighter rods, domed pistons for slightly higher compression, and an electric advance distributor (the "browntop" came with a vacuum advance distributor). The overall gain in performance was about 5hp (3.7kW) for 118hp (88.0kW).

Honda Integra 5-door hatchback

The original Integra was not without its shortcomings though; despite producing 113hp (84.3kW) and featuring a reachable 7,100 rpm redline, the new DOHC engine lacked low-end torque for daily city driving.

Second generation (19891993)

Second generation

Production

19891993

Body style(s)

3-door hatchback

4-door sedan

Engine(s)

1.6L ZC

1.6L B16A

1.7L B17A1

1.8L B18A1

Transmission(s)

5-speed manual

4-speed automatic

Wheelbase

Hatchback: 2,550mm (100.4in)

Sedan: 2,600mm (102.4in)

Length

Hatchback: 4,390mm (172.8in)

Sedan: 4,485mm (176.6in)

Width

1990: 1,712mm (67.4in)

199193: 1,715mm (67.5in)

Height

1990 Hatchback: 1,325mm (52.2in)

1990 Sedan: 1,340mm (52.8in)

1991-93 Hatchback: 1,270mm (50.0in)

1991-93 Sedan: 1,285mm (50.6in)

Fuel capacity

13.2USgallons (50.0L; 11.0imp gal)

Related

Honda Civic

Honda CR-X

Honda CRX Del Sol

Rover 400

DA5-DA9, DB1-DB2

[citation needed]

Honda debuted the second generation Integra in 1989 as a 1990 model, now powered by a new 1.8L engine (B18A1) making 130hp (140hp 1992-1993), giving the model a necessary boost in performance. The three-door hatchback (DA9 chassis code) continued to be available, but the 5-door hatchback was discontinued due to poor market reception and was replaced by a more conventional 4-door sedan body style (DB1 chassis code).

Trim levels for 1990 and 1991 included the RS (base model), LS, LS Special, and a new GS trim level that featured anti-lock brakes, a first for the Integra. The 1991 GS had the option of leather interior.

For 1992, Acura added the GS-R trim level (DB2 chassis code), powered by a variant of the very successful B16A engine, called the B17A1, which was only available in USDM (United States Domestic Market) models. The difference between the B16A and B17A1 is the deck height and compression ratio and its displacement, the B17A1 is a 1678 cc engine. It featured a VTEC system, as found in the then-new NSX, bumping output to 160hp (119.3kW) and a 8000 rpm redline. The transmission shared the YS1 code from the base models, but was only slightly taller in gear ratio to the Japanese market S1/J1 transmissions featured on the XSi's B16. Other features exclusive to the GS-R include the charcoal grey cloth interior (leather as a rare option), body-colored trim and front lip, and the third brake light mounted in the spoiler. Sunroof, power everything, and 14-inch 6-spoke aluminum wheels came standard as well.

The 9293 Acura Integra GS-R is the rarest Integra to date because of its B17A engine, low production numbers, and unavailability in the used car market. This model Integra holds its retail value extremely well because of its rarity, reliability, and performance.[citation needed] It is estimated that approximately 1,200 were manufactured in 1992, and around 1,000 in 1993, for a total of around 2,200 ever produced.[contradiction] The 9293 USDM GS-R was available in only three colors: Milano Red, Frost White, and Aztec Green Pearl . Canadian market GS-R's came in Milano Red, Black Flint Metallic, and Aztec Green Pearl.

Other small updates came on to all trim levels in 1992, namely new front and rear bumpers, a new steering wheel, new taillights, new ECU, new camshafts, and chromed interior door handles.

The second generation was the last Integra to be sold without airbags in the United States. Motorized passive seat belts were used instead. Canada and the rest of the world received standard seat belts.

This generation also saw Acura make a bit of a marketing shift. Prior to the 1991 model year, Acura had made a minor point of the supposed understated elegance of minimal exterior badging. Therefore, from the 1986 to 1990 model years, the only external clues to any Integra's identity came at the rear, where badges for "Acura" "Integra", and the trim level appeared. For the 1991 model year however, Acura's "A" caliper logo appeared for the very first time on the front of the hood, as well as between the taillights. Every Integra made since then has had the "A" badges. 262,285 units were sold from 1990 to 1993.

Third generation (19942001)

Third generation

Production

19932001

Body style(s)

3-door hatchback

4-door sedan

Engine(s)

1.6L ZC

1.8L B18B, B18B1

1.8L B18C, B18C1, B18C5

Transmission(s)

5-speed close ratio manual

4-speed automatic (with 2000 rpm torque converter)

Wheelbase

Hatchback: 2,570mm (101.2in)

Sedan: 2,620mm (103.1in)

Length

Hatchback: 4,380mm (172.4in)

1994-2001 Sedan: 4,525mm (178.1in)

2000-01 GS-R Hatchback: 4,425mm (174.2in)

Width

1,710mm (67.3in)

1998-99 Type-R Hatchback: 1,695mm (66.7in)

Height

1994-95 Hatchback: 1,290mm (50.8in)

1994-96 Sedan: 1,325mm (52.2in)

1996-99 Hatchback: 1,335mm (52.6in)

1996-2001 Sedan: 1,370mm (53.9in)

1998-99 Type-R: 1,320mm (52.0in)

Curb weight

2,643lb (1,199kg)

Fuel capacity

13.2USgallons (50.0L; 11.0imp gal)

Related

Honda Civic

Honda CR-V

Honda CRX Del Sol

DB6-DB9, DC1-DC2, DC4 (19941997)

Honda debuted the third generation model in 1993 in Japan. Acura followed in 1994. It had an unusual four headlight front end design which was dubbed "bug eyes" by some enthusiasts. Standard power from the B18B engine increased to 142hp (105.9kW), and the GS-R received the B18C1 VTEC engine, equipped with a dual-stage intake manifold, ported exhaust manifold and a displacement increase (from the second generation integra) from 1.7 liters to 1.8 liters, bringing power up to 170hp (126.8kW).

1996 Acura Integra

In 1998[citation needed], Honda redesigned the Integra after the new Integra Type-R was released. In Japan the redesign had two more conventional looking headlights as the bug eye look had proven unpopular, outside Japan it had a slightly revised version of the four headlight front.

A Type R model was added for the 1995[citation needed] model year in Japan and in 1997 in other markets, powered by a highly tuned, hand-finished variant of the GS-R's engine. That same year the Integra GSR was sold in Japan as the SiR-G. The JDM B18C Spec-R (B18C5 for USDM) equipped Type-R produced 197hp (146.9kW). Although it had an impressive rev limit, the Type R was still hampered by some criticism; its maximum torque output of only 133.8 lbft at 7500 rpm meant that the engine would have to be revved high to achieve the best performance.

Type R Trim Level (19972001 excluding 1999)

The Type R was the pinnacle of the Integra line. It had many exclusive features found on no other Integra. This trim of the Integra only came with a 5 speed manual transmission. The interior had red stitching on the arm rest and shift knob for 1998, and after year 2000, faux carbon fiber for cup holders, climate control, cluster bezel, and the shifter plate. The Canadian market received a limited number of vehicles in the final year of production (2001) with the ultra rare red interior which composed of red front and rear seats.

The Type R's B18C5 engine was not merely a tuned version of the GS-R's B18C1. The Type-R's head is a re-worked PR-3 head, with better valves, camshafts, retainers, stiffer valve springs and a red cover. During production, the B16 heads would get a green marker line to signify a 'perfect cast', and these would be the heads put away and later used for Type R engines which would receive a hand port and polish. Molybdenum-coated, high compression pistons and stronger-but-lighter connecting rods strengthened the reciprocating assembly. Extra counter-weights were installed on the crankshaft which altered its vibration modes to enhance durability at high rpm. The intake valves were reshaped with a thinner stem and crown that reduced weight and improved flow. The intake ports were given a minor port and polish. Stiffer valve springs resisted float on more aggressive camshafts. Intake air was now drawn from inside the fender well, for a colder, denser charge. That intake fed a short-runner intake manifold with a larger throttle body for better breathing. An improved stainless steel exhaust collector with more gentle merge angles, a change to a larger, consistent piping diameter, flared internal piping in the muffler allowed easier exit of gases. A re-tuned engine computer also contributed to improved power output, which allowed the Type-R to accelerate from 0 to 60mph (100km/h) in 6.2 seconds (as opposed to the GS-R's 7.0).

The transmission gearing used was very similar to that of the civic Si from 19992000, which featured closer gear ratios in second through fifth gears, in order to take advantage of the additional rev range. However, the Type R transmissions featured stronger synchros in all 5 gears. The North American version retained the same 4.4 final drive throughout the Type-R's production run, unlike the Japanese version, which in 1998 changed to a 4.785 final drive along with revised gearing (However the 4th and 5th gear in the 4.785 transmission was from the GSR transmission, which made the ratios for 4th and 5th on the 4.75 nearly identical to the 4th and 5th gear in the 4.4 tranny, resulting in easier cruising at higher speeds). Unlike the other model Integras with a open differential, The Type R came with a torque-sensing limited slip type.

The chassis received enhancements in the form of reinforcements to the rear wheel wells, roof rail, and other key areas. "Performance rods", chassis braces that were bolted in place, were added to the rear trunk wall and sub-frame. The front strut tower bar was replaced with a stronger aluminum piece. Honda marketed a rear strut tower bar as a dealer accessory as well, but it required cutting of the damper mount access panels. Camber rigidity was improved at the rear by increasing wheel bearing span by 10mm. This rigidity was further improved in 1998 when the smaller upper suspension link was changed from a stamped steel part to a fabricated part with a more rigid bushing. The Type-R's body also received a new functional rear spoiler, body-colored rocker panels and front lip, and 5-bolt hubs with special lightweight Type-R wheels. Under those wheels was a much larger set of disc brakes, front and back. The tires were upgraded to Bridgestone RE010 summer tires.

The Type-R received very aggressive tuning in its suspension settings. All soft rubber bushings were replaced with much stiffer versions, as much as 5.3 times higher in durometer readings. The springs and dampers were much stiffer, with a 10mm (0.4in) reduction in ride height. The rear anti-roll bar diameter was initially increased to 22mm (0.9in) in diameter, and further enlarged to 23mm in diameter in 1998. The front anti-roll bar retained the same size, although the end links were changed to a more responsive sealed ball joint as opposed to a rubber bushing on the lesser models. The result was a chassis with very responsive, racetrack-ready handling that ably absorbed mid-corner bumps. Mild oversteer was easy to induce with a lift of the throttle, and during steady-state cornering the car maintained a slight tail-out stance.

The interior was stripped down to reduce weight. The air conditioning system was optional in early models and nearly all the sound-dampening material was eliminated. This provided for a much noisier ride, but since the Type-R was marketed as a race car for the street, most owners didn't mind. The seats were also unique to the Type-R. For the U.S. market, the upholstery was done in Alcantara and mesh, with the bottom cushion made softer than the standard Integras to preserve comfort. The Japanese market cars used Recaro SRII seats slightly smaller variant of the Recaro SRD. This seat is actually heavier than the standard Integra seats.

Integra SJ (EK3)

The IntegraSJ (standing for "Sedan Joyful") was a rebadged Civic Ferio, with modified headlamps and grille similar to the Orthia's and slightly larger rear lights. It was made from 1996 to 2001, and used the 1493 cc D15B engine. Honda's press material of the time indicated that the SJ was intended to provide a "formal sedan" for the Integra range; another reason may have been to sell Ferios using a more upmarket model name, as was the case with the Nissan Laurel Spirit. In Thailand, the Integra SJ was sold as the Isuzu Vertex, last passenger car ever for that market. (This followed Isuzu's practice of selling Honda models as Isuzus which started with the Gemini; while Honda also selling Isuzu's sport utility vehicles in Japan and North America, and pickup truck in Thailand.)

A total of 301,103 Integras were sold from 1994 to 2001.[citation needed]

Fourth generation (20012006)

Fourth generation (DC5)

Also called

Acura RSX

Production

20022006

Body style(s)

3-door hatchback

Engine(s)

2.0L K20A, K20A2 (02-04), K20A3, K20Z1 (05-06)

Transmission(s)

6-speed manual

5-speed manual

5-speed automatic

Wheelbase

2-door: 2,350mm (92.5in)

Length

2-door: 172.2 in (4374 mm)

Width

67.9 in (1725 mm)

Height

2002-04: 55.1 in (1400 mm)

2005-06: 54.9 in (1394 mm)

Fuel capacity

13.2USgal (50L; 11imp gal)

DC5 Integra

Main article: Honda Integra DC5

The fourth generation Integra, produced from 2002 on, was renamed the Acura RSX for the United States, Canada and Hong Kong in accordance with Acura's new alphabetical naming scheme. It also had an entirely new engine, the K-series. The Integra came in two models in the United States, the RSX base model, and the RSX-S boasting the K20A2 engine from 2002 to 2004, while the 2005 and 2006 RSX-S came with a K20Z1. The RSX was still sold as a Honda Integra in Japan and Australia, markets where Acura did not exist.

In March 2006, Honda announced that the Integra would be discontinued in June after its final 300 cars were sold, due to the shrinkage of the coupe market. The reaction of the consumers towards the discontinuation, however, forced Honda to extend production until July 2006 and produce 150 more Integras. The Acura RSX was discontinued as well, as the RSX did not fit within the confines of Acura's re-structured market strategy, and that the introduction of the similarly powerful and less expensive 2006 model-year Honda Civic Si was there to fill in the gap left by the RSX. The Civic-based Acura CSX was also produced in Canada.

Awards

The Integra was on Car and Driver magazine's annual Ten Best list six times, in 1987, 1988, and 1994 through 1997. The GS-R model was called out specifically in 1994 and 1995. It made a return on the Ten Best list as the Acura RSX, for 2002 and 2003. The Integra Type-R (DC2) was named as the 'best front-wheel-drive drivers' car ever' by Evo Magazine in 2006.

References

External links

Wikimedia Commons has media related to: Acura Integra

vde

previous Honda road car timeline, 1980sresent

1980s

1990s

2000s

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

kei truck

Microvan

Acty/Street

Acty/Street

Acty/Vamos

Kei car

City/Jazz

Today

Today

Life/Honda Z

Life/Zest

Subcompact

City

City

City/Logo/Capa

Fit/Jazz/City/Aria/Mobilio

Fit/Jazz/City/Aria/Freed

Ballade

Ballade

Concerto

Domani

Civic

Civic

Civic

Civic

Civic/Orthia/Partner

Compact

Quint

Civic/EL

Civic/CSX

Accord

Accord/Vigor

Accord/Vigor

Accord

Accord/Ascot

Mid-size

Accord/Ascot

Accord/TL/TSX

Inspire/Vigor

Inspire/Saber/Rafaga

Inspire/Saber/Torneo

Inspire/Accord

Insight

Full-size

Inspire/Accord

Legend

Legend

Legend/RL

Legend/RL

Legend/RL

Coup

CRX

CRX

del Sol

Insight

Integra

Integra

Integra

Integra

Prelude

Prelude

Prelude

Prelude

Prelude

Sports

Beat

S2000

NSX

Mini SUV

HR-V

Crossroad

Compact SUV

Passport

Compact Crossover SUV

Element

CR-V

CR-V

CR-V/RDX

Mid-size CUV

Crossroad

Pilot

Pilot

Luxury CUV

MDX

Compact MPV

S-MX

Edix/FR-V

Stream

Stream

Avancier

Airwave/Partner

Minivan

Stepwgn

Stepwgn

Stepwgn

Odyssey

Odyssey/LaGreat

Odyssey/Elysion

Pickup

Ridgeline

vde

Acura, a division of Honda road car timeline, 1986resent

Type

1980s

1990s

2000s

2010s

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

Entry-level

Coup

Integra

Integra

Integra

RSX

Sedan

TSX

TSX

EL

EL

CSX

Mid-size

Coup

CL

CL

Sedan

Vigor

TL

TL

TL

TL

Full-size

Legend

Legend

RL

RL

RL

Crossover

RDX

MDX

MDX

ZDX

SUV


SLX

Sports

NSX

Categories: Acura vehicles | Front wheel drive vehicles | Front wheel drive sports cars | Compact cars | Hatchbacks | Sedans | Sport compact cars | 1980s automobiles | 1990s automobiles | 2000s automobiles | Vehicles introduced in 1986Hidden categories: Articles lacking sources from February 2010 | All articles lacking sources | All articles with unsourced statements | Articles with unsourced statements from December 2009 | Articles with unsourced statements from March 2009 | All self-contradictory articles | Self-contradictory articles from May 2009 | Articles with unsourced statements from March 2007
Honda XR series Book Review: The Secret by Rhonda Byrne Most Popular commuter bike Hero Honda Passion Hero Honda CD Deluxe Hero Honda Hunk Review A Super Biking Event With Trek Mountain Bikes' Raffle Hero Honda Karizma Bike Used Dirt Bikes - A Buyer's Guide 2008 Honda Accord Honda Activa Price in India 2007 Honda Civic Honda Accord San Francisco: Future Models Will Be Hybrid And Not Diesel Why single speed bikes are still the best
print
www.yloan.com guest:  register | login | search IP(216.73.216.125) California / Anaheim Processed in 0.028203 second(s), 7 queries , Gzip enabled , discuz 5.5 through PHP 8.3.9 , debug code: 745 , 22394, 127,
Honda Integra Anaheim