How To Easily Replace Headlights On Acura Mdx

If your Acura MDX's headlights are glowing low

, it's time to replace them to avoid any uncertain problems popping out from nowhere, and leaving you into an unknown trouble. Also, it is quite easy to remove and install the headlights on MDX as its front design requires no additional tools to remove the assembly. You can do the replacement on your own and within few minutes. All you need is a socket wrench set and a little expertise to carry out this job in less than an hour. To ensure that the replacement remains as easy as it look, follow the below mentioned steps to effectively replace the headlights on your Acura MDX.

At first, bring your MDX on a ground level and turn the engine off. Open the hood of your car and disconnect the battery terminals to avoid any electrical shorts.

To remove the headlights, first you'll be required to remove the bolts that hold the headlight assembly into its place and in the bracket. There are two bolts fastened vertically and one horizontally which needs to be removed first in order to remove that assembly from its place.

If you have managed well to remove those bolts, the assembly can now be easily removed. Remove the wiring harness from the back of the headlight assembly so that you can remove the assembly out of its housing completely.

Replace the damaged or dull headlight assembly with a new one. You can buy the replacement headlight from many aftermarket auto parts stores available online.

Re-insert the assembly back into the housing and connect the wiring harness again. Insert those three bolts again, that you had removed earlier.

Test the new headlights for proper functioning by connecting battery terminals. If not working properly, make sure you made no mistake while connecting the wirings.

Using the above tips, you can easily manage to replace the headlights on your Acura MDX within no time. Most of the people are unknown to this repair solution and often end up paying extra amount to the mechanics. However, do make sure that while replacing the headlights never touch the assembly or the bulb with bare hands. This would not only damage your hands, but will also increase the chances of damaging the bulb. Always use a piece of cloth or wear safety gloves when replacing the headlight assembly. Also, before replacing the assembly, it is better to check the actual reason behind the headlights giving low intensity of light. Sometimes, it is also possible that a small electrical relay connected with the headlight might not be functioning properly, or even a low running battery would yield the same dim light issue. So, check for proper working of these elements and then opt for a headlight replacement.

by: John Taps

POST COMMENT

Kolkata Realty Has A Mixed Fortunes What Do You Know Concerning Copper Re-piping? If Lady Gaga Owned A T-shirt Label Feel Freedom Again With Mobility Aids Reverse Candida With Candida Ciet Maldives- A Dream Come True Aware Of The Benefits Of Us Immigration Form I-912? Make The Correct Choice Of Pool Covers Time For A Deep Cleaning Now That Winter Is Gone How To Buy The Best Weighing Machines He Most Frequent Fish Oil Side Effects How To Recover Deleted Pictures From A Memory Card Top 5 Things That Makes Bin Lookup A Phenomenal Tool To Prevent Fraud