How To Locate A Water Leak In Your Home

Every drop that comes out of your faucets in the form of a water leak is equivalent to milliliter

. It takes approximately 4,000 drips to fill one 1-liter can. Your faucets may be losing more than 4,000 drips of water every day through simple leaks, and this leads to massive water loss at the end of the day. To conserve water and bring down your water bill to manageable costs, you need to detect the leaking faucets and fix them. The following are some of the methods you can use to locate a water leak in your home:

Check for drips. Drips may come from almost any source, ranging from the kitchen sink, the toilet tank, hot water tank, swimming pool, shower head and irrigation pipes. If the floor or wall is wet especially near a water outlet or along a pipe, this is a major sign of a leaking faucet or burst pipes. Faucet leaks often occur if your washers are worn out, something you can correct individually or through the help of a professional plumber.

Listen for hissing sounds in your hot water tanks. Hot water tanks leak often, and these leaks can be detected by listen at the sound they produce. If there is a hissing sound coming from the tank, this is a sign that there is a water leak. You can also locate a leak by removing the drain pipes to check whether there are burst pipes. These leaks are associated with problems of the service line and can only be corrected by a professional plumber.

Watch your water meter. If you shut the shut-off valve inside the house, the water meter should stop moving. However, if the dial is ticking, this implies that there is a water leak. Try to locate the leak between the main house and the water meter. You can easily detect a leak on the ground if there is a spot that is different from the rest. Greener grass or wetness on the ground is a sign of a leaking pipe. You need to hire a plumber to fix this problem.

The flapper valve in your toilet can also cause a leak. In order to locate a leak in your toilet, you need to add some food color in the water tank, fill it with water and observe the water in the bowl. If it changes its color, there is a leak in the flapper valve. This kind of leak requires you to replace the flapper valve.

Observe for changes in the pressure of water flowing to your home. When you open your taps, you should be able to tell if the water pressure has gone down. If you can note this change, then there is likelihood that your service line is experiencing a major leak. You need to get a plumber immediately to have it fixed and eventually manage your water bills.

Most water leaks are easily detectable through observation. Changes in pressure, higher water bills and physical signs such as wet surfaces signal water leaks. Take time to inspect your system in order to ensure that you do not lose any water through preventable leaks.

by: Frank Smith

POST COMMENT

Elegant Home Accents - Decorating With Tapestries Why Mom Or Dad Wish To Operate From Home Why Installing Quality Patio Doors Is Like Putting Sunscreen On Your Home Etched Glass Doors: Louder & Bigger They Get To Your Home Designs Proper Home Maintenance Is An Important Thing To Observe Ideas To Learn To Sing Better From Home Give Your Home A 1920s Twist With The Barcelona Chair Home Design Outlet Center To Open A Showroom In Los Angeles, Ca This Fall Install Wooden Privacy Fence For Increasing Landscape Of Your Home. Utility Of Tachometers Enjoy Classic Stay Out From Your Home Plumbing Tips That Every Homeowner Can Use Handy Diy Plumbing Tips For The Homeowner