How To Maintain A Ball Mill In A Vital Period
The ball mill is the key equipment for grinding after the crushing process
, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. When wet Ball Mill works, certain water and other liquid will be added into to increase the flowability of materials, When dry Ball Mill works, capacity is affected because material flowability is reduced, so absorbing wind device is needed on the outlet of Ball Mill, and then negative pressure is formed in the Ball Mill to increase flowability of material, so the capacity is increased.
It is formed by cylinder, feeding part, discharging part, transmission part and main bearing. The central hollow shaft is cast steel, the inner liner can be changed, the rotation big gearwheel is made by cast hobbling processing, and there are wearable liners with favorable anti-wear ability. Reliable and stable are the main advantage of this equipment.
With its advantages of high adaptability to raw materials, continuous production, large crushing ratio and easy-to-adjust products fineness, cement ball mill has been widely used in grinding raw materials and finished products in cement factory and milling other materials in metallurgy, chemical, power and other industrial enterprises. It can be used in open circuit grinding, also used in close-circuit grinding with separator; can work both in dry process method and wet process method, and can simultaneously grind during drying operations.
Maintenance method of ball mill in the break-in period:
1, we should regular check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil, and pay attention to check the tightness of machine. It is recommended to add lubrication oil to the lubrication points in the break-in period (special request except).
2, we should keep the machine clean and timely adjust and tighter the loose parts to prevent the unnecessary wear and looses.
3, we should also maintenance the ball mill after the break-in period and do a good job in regular check. At the same time we should pay more attention to the oil exchange.
4, for the ball mill is a professional machine, the operator must receive the special training and get full understanding of the structure and performance of ball mill. Before operating the worker must first read the instruction booklet thoroughly and operate the machine strictly according to the instructions.
5, the work load of ball bill in the break-in period is generally less than 80% of the rated working load. The work amount should be in a suitable scope to prevent overheating caused by long period operation.
6, check the meter regularly. If there are some abnormalities, please stop in time and eliminate malfunction.
by: libby
Have You Ever Heard About The Stone Paper A Great Assistant In Construction Waste Crushing The Stone Machinery In Mining Machinery Industry Artificial Sand Or Natural Sand For Construction The Cortes Expedition Begins With A Bang 3 Types Of Wooden Utilized In Actual Wooden Furnishings Options For Replacing A Lost Tooth The Most Suitable Gravel Aggregate Production Line Pentax K-x Lens Kits For Pentax Silber - A Heritage Oddities In The Dominican Republic Former West Ridge Academy Tells His Story Chronic Indoor Allergens---5 Common Irritants Found In Indoor Air