How to Apply the Stain to wood correctly?
Prepare Wood for Staining
Prepare Wood for Staining
Sand the wood with fine grit sandpaper, removing nicks and scratches as well as
possible.
The stain will hold better and last longer if you round the wood's edges with
sandpaper.
Brush in the direction of the wood grain to remove any dust before staining.
Wipe clean with tack cloth or a cloth dampened with paint thinner.
Applying the Stain to bare wood
Use a stick to thoroughly mix the stain until evenly blended. Even pre-mixed
stains need to be stirred.
Apply the stain by brushing along the grain of the wood. Don't be afraid to use
plenty of stain, letting it penetrate into the wood surface.
On large areas, a sponge or painting pad is easier to use for more even
distribution. Some sponges may dissolve in the solvents you use. Test the
sponge in the stain before you begin your work.
After you apply the stain, let it absorb for about 10 minutes. Wipe off any excess
stain with a damp sponge. You may want to work the stain deep into the wood
with a stiff bristle brush. Rub with the grain.
If you would like the stain darker, apply another coat at this time. Let each coat
dry completely before applying the next.
Be sure the final coat of stain is smooth by rubbing with a medium-hard brush
prior to applying Waterlox Original Sealer/Finish.
Finish with Waterlox Original Tung Oil products.
PS: if intermixing with first coat of Waterlox Original Sealer/Finish, it is recommended to use an old-fashioned oil-based stain containing no additives such as urethane.
How to Apply the Stain to wood correctly?
By: woodchuck
Some Cool Ideas for Algae Fuel Enthusiasts What is the INS? Does the UK Have a Constitution? Multi-Functional Handheld ADSL2+ Tester Representing D.C Zhongshan High A Closer Look at Criminology Live News Feed Channel For Fox News Why Aerosmith Is So Unstoppable Interest: Fixed or Adjustable? Placing A Sure Bet What to do While Visiting Dorset Paying Tribute To The Legens Of Rock n Roll
www.yloan.com
guest:
register
|
login
|
search
IP(216.73.217.83) California / Rosemead
Processed in 0.017804 second(s), 5 queries
,
Gzip enabled
, discuz 5.5 through PHP 8.3.9 ,
debug code: 51 , 1839, 85,