How to Find an Atlanta Plumber to Do Your Atlanta Polybutylene Replacement

How to Find an Atlanta Plumber to Do Your Atlanta Polybutylene Replacement

Between 1975 and 1996, polybutylene pipes were frequently used in home construction. Builders preferred using it because of its low cost and ease of installation. However, when it was discovered that its strength could fail when in contact with water, its use became minimized. Houses built with polubutylene are not strong so there is need for polybutylene replacement on any house that was built with it. Pipes made of polybutylene can easily be discovered by following the following procedures.

A home inspector or professional plumber is the quickest way to find out if you have this type of plumbing in your home. In fact, if you home was recently purchased, the home inspection may have found polybutylene plumbing so you may have already been notified but did not know the seriousness of changing the pipes. If you do not have experience, you may not know what to look for to determine if the pipes are damaged. The first thing is to learn how to identify this type of plumbing, once you have verified that you do in fact have polybutylene pipes, you can call a professional to come and assess the pipes for damage. The professional will also be able to assist you with the quickest and most cost effective way to correct any damage that may be found and will be fully equipped to handle your pipe replacement.

The first place to commence the search is usually at the hot water tank. The place where the pipes enter the home should be found out. Pipes made of polybutylene are usually blue in color at the place where they leave the underground into the home. Some of them also have black and gray colors. However, it is important to note that every black pipe that comes into the house from the underground may not really be polybutylene pipes. If polybutylene plumbing is difficult to find in the other parts of the home, it may be easier to identify it near the water meter. This is because some builders prefer using pipes made of copper around the house and the polybutylene pipes near the water meter.

During its reign, polybutylene pipes were commonly found inside the home and the underground. Those located inside the home were frequently located around the hot water tanks. It was possible to see these pipes on the ceilings of buildings without basements. These pipes were normally connected to water sources such as the sinks. Sometimes, houses are built with different pipes so it is necessary to search everywhere in the home before making a conclusion. It is only after being sure of the presence of polybutylene pipes that one can authoritatively call a plumber for pipe replacement.

POST COMMENT

DIY mistakes cost UK homeowners £235 million last year Bank Owned Real Estate - Why These Residences Are Cheap And A Fantastic Investment Pick 12 Facts on Chemical Toxins Likely to be in Your Home Basic Installation and Care of your Home Theatre System A Small Key Opens Big Doors; A Small Key Ring Keeps It Close At Hand Attention!!! All delinquent Homeomers who want a 2nd chance to save there Dream homes Adding Kitchen Cabinets For Your Home Do You REALLY Own Your Home? Plumber in Calgary Bathroom Countertops Different Types Of Real Estate Investing Lose Weight Now Before Summer With These Home Weight Loss Workouts Best Ways To Sell By Owner