How to Put on the tube and tire ?

How to Put on the tube and tire ?

How to Put on the tube and tire ?

To reinstall the tube and the tire on the wheel, follow these steps:

Position the wheel with the valve hole facing upward.

Pull back the tire and insert the valve of the tube, partially inflated (enough to give it its shape), into the hole.

Working your way around the tire, tuck the tube up into the tire and on the rim being careful not to twist it.

Pinch together the sides of the tire in order to lift the other half of the tire bead onto the rim. Try to use your hands to put the tire on the rim. Using the tire levers could re-puncture the tube you just worked so hard to repair or replace. When you finish this step half of the tire should be pushed over the rim.

Start with the valve in the bottom, or 6 o'clock position, and begin working your hands away from each other around the wheel and pushing down on the bead with your thumbs or other fingers.

When your hands get closer together at the top, or the 12 o'clock position, squeeze with as much force as you can muster. You should be able to pop the final portion of the bead into place .

Sometimes the tire is very tight when you get near the top. If this happens, you need to let all the air back out of the tube and start again with your hands at the bottom, or 6 o'clock position, making sure the tire is seated down inside the lip of the rim. Pull the last section of tread with your palms. Rotate the wheel and, from the back, use both hands to pull up repeatedly until the bead snaps in.

If you must use a tire lever for the last step, be careful not to pinch the tube against the rim, or you could be back to square one. Either way, it's time to put a smile on your face. You're almost finished and everything is downhill from here.

Inspect the tire to make sure that the tube is not sticking out from under it. As a precautionary step, push the valve up into the tire to make sure that the part of the tube surrounding the value is not pinned against the rim and then pull it back down to inflate. If everything looks good, begin to inflate the tube according to the pounds per square inch (PSI) rating, marked on the sidewall of the tire. As you pump it up, examine the tire to make sure the tube is expanding consistently within the tire and isn't bulging in any areas. If the tube isn't expanding consistently or is bulging, the tube may be twisted or pinched by the tire and need to be reinstalled.

POST COMMENT

How To Clean Soggy And Dirty Leather Luggage Alphabet Song - Song And The Lyrics All On the subject of Test Tubes And The Experiments They Are Used For! Fearfully and Wonderfully Made What Is Invisalign, And How Does It Work Dynamics Gp In Picking And Packing, Assembly On Order Moving offices and how best to do it Bentonite Slurry Wall Purpose And Usage Edit Mp3 Tags The Quick And Straightforward Way 000-m80 Questions And Answers The Five fundamental principles to become a successful entrepreneur Mongolian Barbecue And Its Specialities Captivate And Amaze With Your Character