Inkjet Printer "plug" Causes And Solutions - Ink-jet Printer, Plug - The Printing Industry

Used Ink jet Printer The user may remember, when entering the summer

, hot, dry weather, use often occur after a period of time Print The first "plug" phenomenon, if not repaired, the one affecting the normal work, study, and to over time will result in permanent "plug", causing the print head can not be repaired and scrapped it in big trouble, because if to another nozzle on the price of new machines quickly catch up with friends! Combined with years of actual work I summarize a set of inkjet printer can solve the "plug" approach, the following let us briefly review the structure of ink jet printers Motou:

One inkjet printer Motou structure Motou structure common inkjet printer ink jet head and ink mainly one machine and separate boxes in two ways, one machine Motou structure of the ink in the ink cartridges used up, the Motou, and ink cartridges to be replaced with, Such a structure is relatively more closely integrate, high reliability, but the relatively high cost; separate structure Motou and separate ink cartridges, ink used up ink cartridges can be replaced individually, saving costs to some extent. Most commonly used printers currently on the market (such as EPSON, CANNON, etc.) are double Motou structure: a black (or Photo) Motou and a color Motou. In the ink cartridges, the majority of the independent black ink, the other three color ink cartridges one, there are some products, ink cartridges for each color are independent and can be replaced individually, further reducing printing costs.

II inkjet printer, "plug" formation

Normal print because of print head Mifengbuyan or after homing to place a long time, excessive water evaporation, resulting in dry and Mexico in the fine grain print head tip, so that ink can not be properly ejected; or mix between different ink , chemical reaction, manifests itself in often appear disconnected, color missing, illegible, even failure can not be normal printing.

Three inkjet printers "plug" category

Can be divided into soft block, rigid plug two categories.

(A) the repair of soft plug:

1, soft plug to plug that is for various reasons on the viscosity of the ink in the nozzle due to the break bigger fault. Sometimes I just attached to the ink nozzle surface, usually dipped in inks can be restored after repeated washing. The advantage is simple, fast and without any physical damage; drawback is the use of higher cost than a waste of ink.

2, the application using the printer driver to print head cleaning tool cleaning. The advantage is simple and fast; disadvantage is not a satisfactory cleaning effect.

Note: 1, these two cleaning methods generally should not exceed three. Printer "plug" is not serious, should be washed three times less than that to open. If the three are still not open red, indicating a more serious plug, washing more does not necessarily useful, and a lot of expensive ink unnecessary romantic, then it should be, as the case for further processing;

2, due to cartridge (such as sponge-filled) and occur between the print head "air resistance" phenomenon, there will be a small amount of irregular broken, then do not have to repeatedly clean, place some time after the restart that to normal use;

3, avoid the ink mix. Eager to purchase new ink cartridges can not be added. First to use a clean disposable syringes inhaled some of the ink in the bright areas look closely to see the ink has not suspended matter and, if suspended solids are not mixed. Then from the use of inhaled some ink cartridges and ink for the new purchase mixed stand for 24 hours after the observation to see whether the ink mixed chemical reaction, if the produced changes (such as crystallization, etc.) then shows two kinds of ink compatibility is not good, should not mix!

(B) of the rigid plug repair:

Rigid plug means that there are chemical coagulum nozzle or impurity caused by block, this troubleshooting method is more difficult this time can use the following four methods to be addressed.

by: gaga

POST COMMENT

Postal address in computer memory New way to make cell phone battery life last longer Monitoring Health With Help From Thermography In The Event You Get Hold Of A Flat Screen Monitor? New ways to double phone battery life Mri Dvd - General And Emergency Procedures Conventional Printing Processes And Dye Fabric Classification And Application - Fabric Printing - Rfid In China, China, Or Will Become An Important Market For Rfid-rfid-screen Special Printing To Break The Cartridge Industry "hidden Rules" To Protect The Purchaser - Cartridges, How To Send A Sms Message Online Using Your Computer After Domain Experience Good Chance For One Year MBA Programs Master's in Nursing Programs for Rewarding Careers in Nursing Desktop Computers: 2010 Survey On Service And Reliability