Wireless video surveillance units or VSS are actually said to be comparatively easy to install. The units send out radio signals from the camera or the transmitter that is installed at the site to the device that acts as a receiver. The receiver in turn is attached to the television set through a cable.
In fact it is the only cable that can be used as during the installation of the wireless surveillance system. There is no need for the receivers to be connected to the transmitters with the help of wires.
Such surveillance system comprises of different components. These include:
An antenna and a receiver
A VCR and an additional monitor
A transmitter of images or a camera
A cable that is required to attach the receiver along with the monitoring device
A basic 12 volt DC power supply
A VCR acts as integral to a wireless video surveillance unit considering the fact if the user intends to record the visuals that are been shown on the transmitter. There are some homeowners who would prefer to opt for the live signal feed been shown on the monitor instead of recording footage spanning hours.
As a homeowner, you can either opt for professional help when it comes to the installation of such a system or settle for a do-it-yourself experience. In case you choose to opt for the latter, you would need a few things to carry out the task on your own. These include:
A screwdriver
A drill
A small wrench needed to fasten the cable ends
A pencil for marking the spots for drilling
A ladder
Before you begin with the installation process, it is necessary that you mark the right areas for the installation of the Wireless Security Systems. The cameras need to be placed near the entry and exit points so that you can monitor any unwarranted intrusion. It is necessary that rough sketch is made of both the outdoors and the indoors so that maximum amount of area is covered by the video surveillance unit. It is necessary that you read the instruction in the manual carefully before starting out with the installation process.
If you are not quite sure about the installation process, then it is best to opt for the help of a professional who can assist you in this regard. You can search for companies that offer these services on the web.