Installing A Post Mounted Mailbox

When it comes to putting in an in ground post mounted letter box there is more to it than creating a hole and dropping in the post

. Additionally, you'll need to make some calls before you start to dig and whenever performed correctly, the in ground mailbox post will stay in place for decades to come.

There are a variety of styles of post mounted letter boxes. Anything from a conventional post to the types that have a side to side mount on which the mailbox is fixed and installation will basically be the same, given that the trickiest part will be installing the post.

Before you dig the holes for the post, it's wise to contact the utility companies to ensure you dont dig into any kind of power, water or any other utility lines which may be underground. You may also want to call a nearby post office to get unique details relating to height of the mailbox and the gap from the side of the road. If your mail box isn't installed as outlined by their specs, the letter carrier may not deliver your mail.

On average, the top post, or bottom level of the letterbox ought to be about 33-inches from the level of the road. The front side of the post really should be about 12-inches away from side of the road. These measurements are a median and may differ in the area and will be based upon whether there's a curb on the highway or the road is the exact same level as the entrance of your lot.

You may need a post hole digger, a level, at least 24-inches in length and some ready-mix cement. Don't forget to get the variety that you dump into the hole and then add water because it is less complicated. The hole must be at a minimum 24-inches deep and no greater than 8-inches in diameter. The hole may be deeper depending on the length of the hole you're using.

Whenever the hole is deep enough, place the pole into your hole and pour in the dry concrete mix until it fills up about a fourth of the hole. Using the level, examine it on all four sides to confirm it is straight. Start adding some more dry concrete to around half the depth. Again check your level. Lightly tap the dry concrete to pack it down and after that utilize a garden hose to extremely slowly add water until eventually it rises to about one inch above the dry concrete.

As soon as it is soaked into the cement, confer with your level for a second time and then increase the dry concrete to within one inch of the top of the hole. Add more water and then vanish and let it sit in place for at least 24 hours before attaching the mail box to the very top of the pole.

by: Oliver Jenkins

POST COMMENT

What To Look For When Deciding On Restaurant Furniture Dump Your Diapers: A Guide To Potty Training Boys The Benefits Of Maintaining A Good Oral Hygiene Last Long Enjoy A Better Physique With These Ideas For Getting Fit The Advanced College Management System Through Erp Reference Standard You Choosing For Good Crusher David Woods Empower Network- So What The Heck Is It Really? Esources.co.uk Scam-what Is The Truth? Mine Crusher Enters Into Gravel Industry In 2012 Seo Next Complaints They Are A Myth Jaw Crusher Is Worthy Of Your Choice For Crushing Maximize The Lifetime Of Herbal Vaporizers Identify The Professional Property Management Company