Maintaining And Troubleshooting Your Furnace When You Own A Furnace

one of the most important things that you can do is schedule a regular visit from a furnace repair technician

. However, with the right knowledge, you can implement a few tricks that will help you keep the furnace running at optimal condition.

With the exception of the filter, the furnace must always be turned off before performing repairs. Otherwise, the furnace might turn on accidentally. To ensure that you do not forget to replace the air filter, replace an old thermostat with a digital one that reminds you to replace your filter. By regularly replacing the filter, the furnace will perform optimally.

Every couple of months, vacuum the furnace to keep it clean. Try to vacuum any part of the furnace that is accessible. Make sure that the furnace exhaust vent does not have anything blocking it.

Check to see if the blower is powered by a V-belt with an electric motor. If it is, check the V-belt to see if it is cracking or frayed. If so, it needs to be replaced. If the belt moves more than an inch when its touched, it needs to be tightened.

Unfortunately, when the furniture is not working, the cause of the problem is not always clear. If the furnace Repair is not working at all, there might be a blown fuse. Restore the circuit. The pilot light sometimes goes out. If it does, relight it. If there's no gas, make sure that the gas valve to the furnace opens completely.

However, there are times when the pilot light won't work or will light, but will only stay lit briefly. If it won't light, the opening might need to be cleaned or the pilot light button might need to be depressed more. If it only lights up briefly, there might be an issue with the thermocouple. Tighten the thermocouple nut. If that doesn't work, the thermocouple is broken and needs to be replaced. Make sure the pilot flame is at least two inches long.

If the blower keeps going, check the thermostat to see if the fan it is set to ON. If it is, it needs to be set to AUTO. Make sure the limit switch is set to stop-start cycling.

If the furnace is really noisy, it shouldn't be. Loud noises are an indication that there is either something damaged or the motor or blower needs lubrication. The lower belt might need to be adjusted to be tighter or looser. Sometimes, the access panel might be loose or the belts could be stuck or damaged. Replace anything that is damaged.

A variety of problems can be caused by the burner being dirty. Under these circumstances, always call a professional.

by: Wendell Depaiva

POST COMMENT

Beauty Tips And Tricks When It Comes To Working Women: 10 After-work Indulging Smart Ideas 3 D Wall Panels To Make Your Wall Interactive And Beautiful Hgh Therapy And Role Of Hgh Doctor Hgh Injections And Its Side Effects Printers And Recycling Cartridges Charlottesville, Va Restaurants And Its Hospitality Is Remarkable Advanced Design Policies And Also Work Of Art Online University And Online Courses In South Africa Study Online South Africa: How It Works And Why Its So Important Differences Between Forensic Psychology And Clinical Psychology Criminal Profilers And Psychologists Determine Types Of Offenders Siebdruck Auf Textilien - Wear Custom T- Shirts To Suit Your Style And Purpose Five Tricks To Fighting Belly Fat And Keeping Slim