Maintenance Guide From A Clutch Replacement Bristol Repair Specialist

One of the least understood components for car owners is the transmission and its importance to the safety and performance of their vehicles

. Transmissions in most cars are situated toward the front between the engine and drive shaft. Most automobiles have an area located near the passenger side where the shaft is recessed. Whether the vehicle is automatic or standard, it contains many of the same parts. A transmission and clutch replacement Bristol service can check your system for smooth operation.

System Removal

Transmission components include a clutch which engages and disengages the system, a driveshaft to connect the transmission and engine, gears which power the shaft, plus an enclosed case to surround all the components. The inside fluid is specially designed to lubricate and cool the gears. If you are having transmission problems it's not always necessary to have a major overhaul. Although this type of work is usually best left to clutch replacement Bristol professionals, with the appropriate equipment it's possible to perform an inspection yourself.

Needed Equipment

The majority of car owners can replace fluids and transmission lines if they possess the correct tools and knowledge. However, any repairs beyond that will likely require dropping the transmission. This will involve having access to a lift to access the underside. Additionally, a heavy-duty stand will be needed to hold the unit when fasteners are loosened and removed. Be sure and keep the surrounding area clean and free of fluids as a safety precaution.

Disconnect the Case

The next step is disconnecting the transmission. Usually, it is secured with a large bolt that comes off quite easily. Fluid inside the unit should be completely emptied through the drain port located on the case and then properly discarded. At this point new fluid can be added. Never reuse old fluid as it likely has contaminants. At the transmission front there is a large flange connection with more bolts. After these are removed the case can be lowered from the vehicle.

Carefully Inspect All Components

The clutch system consists of plates which are easily visible once the case is taken off. Worn pressure plates are a frequent occurrence in manual transmission systems due to intense pressure and friction. Always ensure you keep grease and oil off the face of the plate. The clutch is a critical component that must be well maintained. If in doubt, contact a local transmission and clutch replacement Bristol specialist for more information.

by: josepht072

POST COMMENT

Maintenance Of Air Condition Can Reduce Cost The Importance Of Hearing Aid Maintenance Maintenance Tips Of Crushing Machine Charleston Air Conditioning Company Will Help In Maintenance The Volkswagen Carefree Maintenance Plan Drainage & Sewer Maintenance Offered By The Auckland Plumbing Company What Professionals Offer In Heat Pumps Maintenance General Car Maintenance Tips For The Beginner Maintenance Tips On Water Purifier Steps For Maintenance Of Your Power Washer Pump Heat Pump Maintenance Gas Heat Maintenance Managing A Maintenance Crew