Non Return valves in fluid systems

NON RETURN VALVE

NON RETURN VALVE

A check valve, clack valve, non-return valve or one-way valve is a mechanical device, a valve, which normally allows fluid to flow through it in only one direction.

Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Types of check valves

Ball check valve -

is a check valve in which the closing member, the movable part to block the flow, is a spherical ball. In some (but not all) ball check valves, the ball is spring-loaded to help keep it shut. For those designs without a spring, reverse flow is required to move the ball toward the seat and create a seal

Diaphragm check valve -

uses a flexing rubber diaphragm positioned to create a normally-closed valve. Pressure on the upstream side must be greater than the pressure on the downstream side by a certain amount, known as the pressure differential, for the check valve to open allowing flow. Once positive pressure stops, the diaphragm automatically flexes back to its original closed position.

Swing check valve or Tilting disc check valve -

is check valve in which the disc, the movable part to block the flow, swings on a hinge or trunnion, either onto the seat to block reverse flow or off the seat to allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle

Stop-check valve -

is a check valve with override control to stop flow regardless of flow direction or pressure. In addition to closing in response to backflow or insufficient forward pressure (normal check-valve behavior), it can also be deliberately shut by an external mechanism, thereby preventing any flow regardless of forward pressure.

Lift-check valve -

is a check valve in which the disc, sometimes called a lift, can be lifted up off its seat by higher pressure of inlet or upstream fluid to allow flow to the outlet or downstream side. A guide keeps motion of the disc on a vertical line, so the valve can later reseat properly. When the pressure is no longer higher, gravity or higher downstream pressure will cause the disc to lower onto its seat, shutting the valve to stop reverse flow.

Duckbill valve -

is a check valve in which flow proceeds through a soft tube that protrudes into the downstream side. Back-pressure collapses this tube, cutting off flow.

Non Return valves in fluid systems

By: msmperera

POST COMMENT

How to play top lottery number systems DecisionPoint Systems (OTCBB: DNPI) Applauds Shareholder Approval for Reverse Merger Fiber Optic Light Source for Optical Communication Systems Emergency Response Systems Plc Systems Can Do So Much To Improve Output Control Misting Systems and the role of droplets Premier Wealth Systems Portable x-ray systems allow physicians to work in a disaster situation How UPS systems serve your needs Closet Organizer Systems Alarm Systems - Top Of The Range Cylindrical Engraving With Rotary Engraving Systems Sign Making With Rotary Engraving Systems