Oil & Grease Lubrication System

Tribology is the science and engineering of interacting surfaces in relative motion

. It includes the study and application of the principles of friction, lubrication and wear. Tribology is a branch of mechanical engineering.

The tribological interactions of a solid surface's exposed face with interfacing materials and environment may result in loss of material from the surface. The process leading to loss of material is known as "wear". Major types of wear include abrasion, friction (adhesion and cohesion), erosion, and corrosion. Wear can be minimized by modifying the surface properties of solids by one or more of "surface engineering" processes (also called surface finishing) or by use of lubricants (for frictional or adhesive wear).

Lubrication is the process, or technique employed to reduce wear of one or both surfaces in close proximity, and moving relative to each another, by interposing a substance called lubricant between the surfaces to carry or to help carry the load (pressure generated) between the opposing surfaces. The interposed lubricant film can be a solid, a solid/liquid dispersion, a liquid, a liquid-liquid dispersion (greases) or exceptionally a gas.

Adequate lubrication allows smooth continuous operation of equipment, with only mild wear, and without excessive stresses or seizures at bearings. When lubrication breaks down, metal or other components can rub destructively over each other, causing destructive damage, heat, and failure.

Typically lubricants contain 90% base oil (most often petroleum fractions, called mineral oils) and less than 10% additives. Vegetable oils or synthetic liquids such as hydrogenated polyolefins, esters, silicones, fluorocarbons and many others are sometimes used as base oils. Additives deliver reduced friction and wear, increased viscosity, improved viscosity index, resistance to corrosion and oxidation, aging or contamination, etc.

Greases are used where a mechanism can only be lubricated infrequently and where a lubricating oil would not stay in position. They also act as sealants to prevent ingress of water and incompressible materials. Grease-lubricated bearings have greater frictional characteristics due to their high viscosity.

Lubrication is required for correct operation of mechanical systems pistons, pumps, cams, bearings, turbines, cutting tools etc where without lubrication the pressure between the surfaces in close proximity would generate enough heat for rapid surface damage which in a coarsened condition may literally weld the surfaces together, causing seizure.

Oil & Grease Lubrication System

By: varalakshmi

POST COMMENT

Daily Trivia Quiz #4 – Bible Questions with the answers Places of interest in Spain-Ubeda Industrial Vibrators for Powder & Bulk Solids anxiety suport groups Agencias de publicidade. Porque você precisa delas? Importance Of Plants Get the best bed and accessories for your room BPO: Looking Ahead Industrial Scrubber System Eyeglasses And Cases Donation Doctor Says: Choose Suitable Presbyopic Eyeglasses Through Customization Read This Sure Fire Ways Guaranteed To Make You Last Longer In Bed - She Will Practically Remain Glued To You Different Types Of Hardwood Refinishing