2. No need of special used printers and special inks.
3. One general printer and one hot laminator guarantee the high quality card with clear picture
4. Suitable for small amount of card making process in short time - Card Embosser
Illustration on card making steps:
Three kinds of material included
Material1:Pinting material A(translucent)
Material2:PVC core material B(White)
Material3:Back printing material Ctranslucent
Printing the picture (print the picture on the matte surface of the printing material A rather than the smooth surface with a film)
Dry the well-printed picture A for 4-5 minutes. ( make sure no moisture on the surface.)
Stack them together, from top to bottom: printing material A, PVC core material B, back printing material C.(attention: the smooth surfaces with a film of printing material A and back printing material C should be exposed outside.)
Set temperature on degree 150-180( just choose a middle temperature).
Put the stacked sheets through the hot laminator to press them together - Card Embossing Machine.
Cut the laminated sheets with PVC cutter, a beautiful card is made.
Attention: there are protective films on both surfaces of the laminated sheets when all the steps are finished. You can get rid of them or not according to customers needs.
Without spending several thousands of dollars on expensive machines, you can make the same high quality cards. One printer and one hot laminator is enough.Small invest. Large business return!