Recommendations for Creating a Dog Bed
Recommendations for Creating a Dog Bed
Recommendations for Creating a Dog Bed
When you build a dog bed for your dog, it may be an entertaining and a satisfying experience for you and for your pet. A dog bed is an easy design that doesn't take too much time to design it and it does not cost a lot either.
Planning
Make certain that you have the accurate measurements of your dog. To do that, you should measure your dog while they are lying on the floor. When measuring you need to have extra room on every side, to allow for extra comfort. If you have a dog that is average sized, then the measurements ought to be near 3 1/2 feet.
Write down your measurements. You will want to find any washable material for the bed, or any cloth that is appropriate for a mattress. If you'd like to, you may use different colored material for the top part of the bed (many people do like to use a color that matches their dog's fur). Other supplies that you will need: batting, a measuring tape, sharp scissors, a sewing machine and straight pins.
Start measuring your fabrics. With the measurements that you took earlier, cut the fabrics.
Use some extra loft-batting, and fold it so that it becomes 4 layers thick. The batting has to be cut 2 inches shorter than the other fabrics. The batting will need to be shorter in all lengths.
Now you'll want to pin the cloth on the right sides together. Put your pins 1 1/2 inches from the edges to allow some room for the seam. Replicate this method for each of the sides, and leaving one side open.
Start Sewing your Dog Bed
Start stitching your cloth together. Go along the path of your pins to form the seams, and stitch the three edges of your cloth that you pinned.
After that, you'll want to trim the corners of the fabric. Since the cloth is still inside out, put your scissors on to the corners and make a little cut. You should cut near enough to the seams but don't go through them. This cut will make the dog corners seem a lot neater.
Once you are done with that, turn the material right side out. Roll up the batting, & insert the batting through the edge of the dog bed that is open, then tenderly roll it out.
The Last Bits of Your Dog Bed
The top and bottom fabric of the open side should be rolled under themselves. Then you will have to pin the material together. Make sure you place the pins as close as possible to the edge.
Next, you will need to stitch the material together, and the stitches will need to be as close to the edges as you possibly can get. The closer to the edges, the tidier it looks.
To make it look like it's long-lasting, you ought to back-tack the last stitch created. This will help with the finishing touches, and make your dog bed look like it's well made.
If you follow these guidelines you should have no problems designing your dog bed. If you have to make changes to go with your own preferences, then that is up to you. But, when sewing your dog bed, it shouldn't cost you too much, since your pet will ultimately roll around in it and make it feel like it is his.
Many Types Of Parasitic Worms Are Found In Young Dogs The Best Dog Breeds For Families The Pet Training Collar Definitely Will Be A Beneficial Tool Use Faux Fur Jackets and Save the Animals Life With A Pet That Has Been Abused Feed a Hungry Dog with Purina Coupons Bird Dust Solutions---5 Ways To Reduce Bird Dust In Your Air What Have Been The Principal Differences Of CAT 2009 And 2010? Sit Stay Fetch Dog Training Manual - Is it the Real Deal? Nintendogs Knit Dog Clothes Patterns Potatoe Plush Adult Mascot Costume, Dog Mascot Costume Hornet Plush Adult Mascot Costume, Cat Mascot