Repairing Your Vinyl Window: The Basics

Millions of homeowners choose vinyl windows due to their energy efficiency

, versatility, price, and attractive appearance. However, there are times when a vinyl window will break and have to be repaired. When a vinyl window is in need of repair and homeowners are equipped with the knowledge and tools to do the repair, they can easily repair a vinyl window at a minimal cost.

Below are a number of tips to repairing your vinyl window:

Window Will Not Stay Up: Sometimes a window will stop staying up. This is often due to a worn out spring. After opening the window lock, lower the top window so that the spring that sits against the frame is exposed. Next, use a screwdriver to remove the screw and spring. Replace the spring with a new spring from the manufacturer who made the vinyl window. Finally, push the window back into position and attach the spring.

Broken Windowpane: Accidents can happen causing a windowpane to break. If a windowpane is broken, you will have to order the appropriate window glass that fits the window frame. You should check with the manufacturer to make sure you get the right window pane. It is important to make sure the pane is the appropriate measurement so that it properly fits in the frame. Glass panes for vinyl windows are normally available as incorporated glass units. Once you have received the glass pane, you will have to first remove the broken windowpane. It is important to make sure all of the sealant and any other obstructions are removed from the sliding frame. Then, all that you have to do is slide the new windowpane in place. After the pane is secure and in place, seal it with caulking. Once you have finished sealing, use isopropyl alcohol to wipe away any caulking smudges, fingerprints, and any other stains.

Replace Broken Vinyl Jamb Liner or a Broken Balance Cartridge: For this repair project, follow the instructions for repairing a broken pane except you will be removing the vinyl jamb liner. After removing the sliding panes, you just have to snap the jamb liner from the window sill. You can do this using a utility knife. Once the jamb liner is removed, just snap the new jamb liner into place and fit everything back into the appropriate place. Make sure when reinserting the screws that they are tight and secure. The caulking will take about 24 hours to dry.

It is always a fun and rewarding experience doing a home repair. Before you attempt to repair a vinyl window it is important to check to see if the design of your window may require a special method of repair. As well, always follow the manufacturer's instructions when doing a repair and make sure you use the appropriate parts. If you run into problems, you should talk to a professional. In no time, the job will be completed and you will be satisfied with the result, and you can then start to enjoy your vinyl window.

by: Adriana Noton.

POST COMMENT

Pc Repair Colorado Springs Can Help You Today Types Of Carpet And Rug Repair aol im windows mobile and instant messenger download for windows Several Methods To Reset Any Windows Password Efficiently A Solution Guide For Windows Transition Between On & Off Issues Laptop Software Repair For Your Convenience Third-party File System Driver Cause Partition Loss In Windows How Do I Remove Vista Security 2011 - Uninstall/Remove Vista Security 2011Quickly and Easily Remove Vista Antivirus 2010 - How to Easily Uninstall Vista Antivirus 2010 from Your Computer？ Remove Windows Police PRO - How to Easily Uninstall Windows Police PRO from Your Computer？ How To Repair A Bad Hard Drive - Latest Repair Tip! Outdoor Adventures City Of Gardens Boutique Hotels Golf Vacations Water Activities Beautiful Vistas Check And Repair Hard Drive - Repair It !