Spiral Staircase Standards - Balustrade
If youre thinking of fitting a spiral staircase
, then its worth reading up on Building Regulations and British Standards to make sure youre fitting the right products. Some continental products which are sold in the UK only comply with European (usually German) standards, and so you could unwittingly fall foul of the building standards. This may not become apparent until you come to sell your property (or rent it) and can become a sticking point to moving house. The most common problem when looking at which spiral staircase to buy is spacing between spindles, which varies across Europe.
This will help to make sure the staircase is safe to give you real peace of mind.
Spiral Staircase balustrade - Building Regulations
Part K of the Building Regulations (Protection from falling, collision and impact) sets out the minimum safety requirements for a staircase. These differ according to how many people are expected to use the staircase.
In a regular home, balustrade must be fitted on all flights of stairs and landings where there is a drop of 600mm or more. This applies to every staircase in the home, e.g. from the ground to the first floor and from the first to the second floor in a three-storey townhouse, for example.
Possible exceptions could include small steps down to a conservatory or steps within a split-level living area.
If children under the age of 5 are likely to use the staircase, then the balusters must be no more than 99mm apart a useful test is to see whether a 100mm sphere can pass through the gap. This is known as the babys head rule and ensures that children cannot become trapped between the balusters. (Typical products which do pass this crucial test are the Gamia Range by Rintal, The Artemis and Neptune range by Spiral Stairs Direct, at
www.spiralstairs-direct.co.uk and certain models in the Arke range)
The balustrade on a domestic staircase including all types of spiral staircase must also be a minimum of 900mm high.
British Standards for spiral staircase balustrade
As well as complying with Part K, balustrade systems fitted to a spiral staircase must also meet the requirements of BS6399 Part 1:1996 Loadings for buildings Code of practice for dead and imposed loads.
This means that a balustrade fitted to a spiral staircase within a private family home must be able to resist a loading of 0.36kN/m the equivalent force of one family member falling against the balustrade.
Regulations for a shared staircase
For a staircase used by the occupants of more than one home, the standards are stricter. This would apply to a staircase in an apartment building, student accommodation or a care home.
In line with the requirements of BS6399, stair balustrade must be able to resist heavier loadings of 0.74kN/m. This is because the staircase is likely to be a main thoroughfare used by higher numbers of people, which means the balustrades need to be more robust.
All of the ranges mentioned will withstand these forces and meet British Standards, so you dont need to worry about meeting Building Regulations. If in doubt ask the supplier to ensure in writing that the spiral staircase they propose will meet both building regulations AND the relevant British Standard before you purchase.
You can find out more by contacting the spiral staircase suppliers direct at
www.spiralstairs-direct.co.uk.
by: spiral_stairs
Calculating Spindles In A Spiral Staircase Balustrade Qnet Fraud No Truth In Those Blatant Lies The Truth Versus The Qnet Fraud Why Should You Opt For Roll Up Banners? Hammam, Massage Ou Spa, Le Choix Du Plaisir Qnet Scam Rumours Finally Take A Rest Should You Take A Payday Loan? An Ancient Trade An Alternate Universe What Must A Driver Do, If Involved In A Traffic Accident ? Extending The Life Of Area Rugs With Basic Care History Of Analytics Party Dresses- Buy Only From Trusted Clothing Stores