Respirator is an important safety part when you are entering one area that has harmful contaminants
, just like poisonous particles in the air. Wearing your respirator incorrectly may result in the air leak therefore the wearer will be breathing in the potentially unsafe air instead of breathing contaminant free air. Opportunely, it is simple for you to wear your respirator correctly.
Step 1
You should put your respirator over your nose and mouth. The nose piece has to be placed at the top of your nose, so it is important for you to check that the metal nose piece is in the right location. But if it is not over your nose, flip your mask around until it is.
Step 2
Then you need to drag the top strap over your head and set on the top of your head stopping above your ears. It should be tight to your head and then you have to keep the mask in place with the pressure.
Step 3
After that you have to draw the bottom strap over your head and the place it below your ears. If the straps are small and too tight, then you have to take off the mask and stretch them out before you are going to replace your respirator.
Step 4
Shape the nose piece. Doing this thing form the top of your nose and also pushing it tight to the nose will stop your respirator to your face.
Step 5
For the last thing that you should be done is that you can check for air leaks. If your respirator is on, it should be checked for any air leaks. It can be fatal, therefore you should check when the breath is taken that your respirator caves inward.