The same pattern could be applied to numerous garments once you allow the rhinestone heat transfers to create one-of-a-kind patterns for you.
It is easy to create rhinestone iron on transfers. First of all, a picture of what you are trying to create should be formed in your mind. Then off course you are required to transfer that mental picture onto a piece of paper and you can do this either by drawing it freehand or you could also use a drawing program on your computer for this.
After finishing this, you should get to work and create your rhinestone heat transfers. Take a piece of cardboard and draw your desired pattern on it. Then keeping in mind the rhinestone transfer design you have created, cut a piece of your rhinestone transfer paper slightly larger than that.
Remove the white backing off from the rhinestone transfer paper so that it could be used later. Then put the rhinestone transfer paper sticky side onto your design.
Now, place your rhinestones in such a manner that they face down on top of the rhinestone transfer paper and make sure that the backs of the stones are towards you.
Now just re-attach the white backing you set aside earlier after removing the tape from the transfer paper.
Make sure all the stones are properly placed after closely analyzing the rhinestone transfers. Now your rhinestone heat transfers are complete. If everything is fine just apply your rhinestone iron on transfers to your garment.
Firstly, you need a hard and flat surface. Without getting the stones removed take the backing off of your rhinestone transfers.
Place the adhesive side of the rhinestone iron to transfer heat to your material and place a cotton cloth over your rhinestone transfers to avoid burning. Avoid steam ironing.
Hold the iron at least for 45 seconds over your rhinestone heat transfers. Do not slide the iron back and forth and move it to the next section of the rhinestone heat transfer. After doing this for every portion of your design keep on repeating it until each section gets the iron twice.