Tips For Painting An All-wood Window

Wood is a great material for building windows because it insulates well

, is very strong and lasts for years. But without a protective coating like paint, they can be susceptible to rot and decay. Before you begin painting your all wood windows, take a look at these tips and techniques and youll be sure to get the job done without any problems.

Prepping the Wood

Its in your best interests to put down a large drop cloth under the window. You may also want to tape painters plastic around the window if youre planning on painting the inside of the window. Be sure to use blue painters tape and not masking tape as this can cause the paint to bleed through and masking tape can damage drywall and other delicate surfaces.

New all wood windows need to be cleaned and primed before you can begin working on them. A wood cleanser can be used, but basic soap and water work just as well. Never use a degreaser or other chemical cleaners on wood as it may cause the wood to permanently stain, warp or twist.

Sanding the wood is essential to the paint adhering to the all wood window successfully. When the woods surface is pitted and grooved with fine sandpaper, paint can easily bond with the wood fibers and actually become part of the wood. Without this bond, paint will eventually flake off a wood window. Be sure to use fine grit sandpaper and always sand with the wood grain. Be careful when sanding around the window pane as it can permanently scratch the glass if youre not careful. Wipe away the wood dust using a dry paintbrush or dust cloth.

Apply the Primer

For this part of the project, youll need to have a small 2 latex paintbrush to get at the smaller parts of your all wood window. Youll also need a quality latex binding primer to coat the window and get it ready to accept your latex paint. Apply a very light coat onto the window. Youll want to avoid any runs because these can easily seal the window shut, leak into sensitive window parts and make a mess. Youll need to paint the entire window, so getting right up to the edge of the glass is imperative. Dont worry if you get a little paint on the glass, it will easily come off later with a razorblade. Let the primmer dry for at least four hours. Open and close the window every half hour or so to prevent it from sticking shut.

Apply the Paint

Once the primer is dry, you can begin painting the latex paint onto the primer coat. Youll need to paint the windows using a very light coat of paint to prevent any runs or drips. Once you have the first paint of coat complete, let it dry for at least two hours, and then apply a second and third coat as needed. Open and close the window every half hour to prevent the window from sticking shut. Once its all dry, scrape away the excess paint from the window with a razor blade.

by: Heidi Parrish

POST COMMENT

Disequitable Divorce Distribution Primera A 3 Bhk Apartment By Ramprastha Builders The Benefits Of Having A Good Screensaver For Your Computer Get Your Private Limited Company Registered 1month Loan How To Get Easily If The Mini Fits, Buy It Lose Weight Before Your Big Day! Some Concern To Mull Over While Going For A Mould Making Company Get The Best Of Leather Lounges In Melbourne Protect Your Computer With Computer Repair Dallas Luxurious Vacations Useful Social Monitoring With Social Analytics Galaxy S3 : Smartphone Redefining Smart