Water Softener San Diego - Preventing Water Damage In The Laundry Room
The washer and drier are usually located in the laundry room and produce heat and moisture
. Basic maintenance is required to assist avoiding water problems and mold.
The following guidelines are easy to follow and will supply good tips and suggestions for potential water harm that could be caused by the washer, the dryer, hoses, filters, and the utility sink.
Be sure to execute these inspections every few months and be thorough whilst executing them.
The Washer
The washer is attached to both cold and hot water lines. Check them frequently. Begin with the joints and fix a leak should you find it. Be sure to inspect both ends of the water lines. Clean or replace the filters once in a while. A blocked filter will slow the water flow into the washing machine, and might bring about some malfunctions. This issue is worse in areas with "hard water". Inspect the shut off valve by looking for drips into the washing machine while it isn't in use. Should you discover a leak, replace the valve.
Hoses & Filters
Like in most appliances, problems often begin in the hose. Keep at least 4 inches between the water connection and the back of the washer. This space will keep the hose from kinking and bursting. Verify the hoses and replace them if old. Think about installing steel-braided hoses.
The Dryer
The dryer is connected to a ventilation hose. Check it thoroughly. The dryer ventilation hose should be connected to the outdoors. Look for lint behind and under the dryer and make sure the vent pipe is not clogged. Make the exhaust short as possible for the dryer to vent properly.
Utility Sink
The utility sink is sometimes the source for water associated issues. Look for leaks under the sink. A drip in the trap under the sink could be a sign for troubles and should be repaired instantly. Slow draining pipes might indicate a partially blocked drain. A constantly dripping faucet must me repaired promptly. Replace sink seals if they are cracked or loose. Damped or stained walls around plumbing pipes indicate an internal leak that must be repaired before additional damage takes place.