Xbox 360 Repair: Heat Issue Tips And Information

There is nothing more agitating than watching a movie or playing a game and encountering a system freeze-up

. Whether you are dealing with a heating issue or other freeze-inducing problem, it is nonetheless a nuisance to deal with. Fortunately, there is some handy information available for repairing your Xbox 360 during these circumstances.

You may already be well aware that heat needs to be removed from your Xbox in order for it to function properly. Otherwise you will soon begin to see the system freeze, or experience odd artifacts in the graphics. As these become apparent, it is time to clean out your console.

There is the likelihood that game lockups can be caused by DVD issues. However, if you are experiencing problems only while playing games and in specific spots during the games, you are probably due for a system clean-up. Repairing your Xbox 360's heat issues as soon as possible will guarantee you will get back to playing quickly.

If you decide to open the console, first start by removing the hard drive and the DVD drive while leaving the rest of the system untouched. Start by blasting out the heat-sinks with compressed air while working your way out. If you have purchased a new can of air, spray a little away from the system to avoid spraying out the liquid propellant as you move through your Xbox. You can cause serious damage to the board and electronics by spraying it with the subzero liquid.

It is important to note that the heat generators are circled in red, and the cooling inlets and outlets are in blue. From there, you want to continue spraying compressed air by cleaning the dust from the surface of the board. Make sure you pay close attention to the air holes at the front and sides of the case. If not scrutinized, these holes can lead to serious problems and repair for the Xbox 360.

After cleaning the motherboard with compressed air, your next step is to remove the backing from the heat-sink while placing it squarely on top of the chip. Put firm pressure on the backing for at least two minutes. The last step is to replace the standard power course for the fan with a higher voltage power source. This should improve the fan speed while eliminating the system's probability of locking up.

This can be a tad complicated if, like many, you are not a technical wizard. If this describes you, then you may be better off handing over the system to the professionals to clean your system. However, recognize that there are options out there to repair your heat issues other than sending it away.

by: Eric K Frey

POST COMMENT

XBox 360 Guides and Comparison by:Jeffri Alisan The Red Ring of Death: The Xbox 360's Nightmare by:Daniel Cliff Xbox 360 Elite This is For The Real Gamer by:Cecilia Ferguson Information about xbox 360 headset Information about Xbox 360 Remote Xbox 360 Repair Guide Xbox 360 Red Light Fix Pro - Review Importance of xbox 360 microphone in the market Xbox 360 Wireless Networking Adapter | Ishopvideogame Xbox 360 E73 Fix, What You Need to Know and How to Fix it Copying Xbox Games How to Copy Xbox 360 Games Smoothly At last, he didn't buy anything