subject: Examining The Windshield Washer Fluid Level [print this page] Windshield washer fluid helps you to clean the windscreen while driving without stopping the vehicle. It is very useful because sometimes windscreen gets dust or other elements which lowers the visibility for driver and he can clean the windshield while driving with the help of washer fluid. Washer fluid can easily be made at home and can easily be checked at your parking lot. It is better to check your washer fluid regularly, because the fluid which remains ineffective for long time may lose its strength to do its job. Sometimes contaminants get their way into this fluid which makes it dirty and ineffective for use and in some cases instead of cleaning the windshield it makes it grimier.
Here under, we will see how to check and replace the washer fluid on your own.
You Need
You need the following things to replace the windshield washer fluid:
-Funnel
-Washer fluid
Directions
1.Park the car on a flat surface and apply the park brakes. Le the engine cools down for some time and open the front hood.
2.Locating windshield washer fluid reservoir is not a difficult thing. It would be white in color and finding it not an issue. Locate it.
3.Washer fluid reservoir is mostly a transparent tank. You can even see the fluid level easily through it. This will give you a clear idea whether the fluid needs to be replaced or not. Even if you find it below half level, it is better to replace it or refill it to the required level.
4.Examine the reservoir for possible leaks or cracks. If you find any kind of crack or leakage, it is better to get your reservoir replaced.
5.Before replacing the fluid make sure that you have the best recommended for your vehicle type. You can also make this at home but be sure to use standard detergents and windows cleaner. For better idea you can consult the vehicles manual or a specialist mechanic.
6.Remove the cap of the reservoir. Take a funnel which will help you to avoid spilling up of the fluid while refilling the reservoir.
7.Refill the reservoir with the help of the fluid, do it slowly. Keep an eye on the level of the fluid, while filling it. When you reach to the required stop filling and recap the reservoir. Close the front hood.
8.Start the car and check the windshield washer fluid with the help of the specific button. You can feel the difference yourself.
You can replace and check the washer fluid by following the above steps easily. Replacing fluid at home will not only save your money but also save your time.
