subject: Accessorize Your Home - Build A Bar [print this page] Building a bar in your residence can add to the worth, functionality and aesthetics of your residence. A bar will furthermore be a very useful feature when you are entertaining and it gives you a location to keep your liquor.
If you are thinking of making a bar in your dwelling there are a couple options you may consider. You may buy a ready-made bar or get one custom-made, you may purchase bar plans that will tell you how much material you require, what materials and step-by-step guidelines. Or you can construct a bar without any help with a bit of knowledge.
If you dont want a permanent structure or you want something simple to reposition, you might opt to use bamboo or some similar flimsy material. However, if your bar will be a long-term element you will have to use more sturdy material. As such here are a few instructions you can use to construct a bar of your very own.
Required Tools
Screwdriver
Glue
Saw
Drill
Clamps
Required Materials
2x4s
Wood screws
Triangular wood blocks
Molding
Sink
Faucets
inch copper pipe
Shutoff valves
Flexible hose
Drain pipe
Facing board
Instructions
Lets suppose that you are constructing a bar in your basement; use the 2x4s and glue to build a frame for your bar, use the screw driver to place wood screws into all the joints which you glue together to properly secure them; use the clamps to keep the frame in position until all the screws are in position and the glue has dried.
The height of your frame should be around 44 for easy access; screw a wood block into each horizontal angle of your frame to make the frame firmer. Leave the back part of the bar open so you may add shelves later on.
Add whichever reinforcements you have to so the bar may contain shelves, sinks and coolers; keep in mind when framing the box that you will need holes for electrical cords, faucets and whatever other amenities you select.
Next comes the plumbing, put the sink where it will be in the bar and use the inch pipe to carry hot and cold water to the bar location. Install shutoff valves under the sink and run the flexible hose from the shutoff valve to the faucets in the sink. You have to additionally put in the drain pipe.
Then is the electrical segment; the steps here will vary based on the various elements you want in your bar. But it is recommended that for both the electrical and plumbing segment you call in a professional if you do not have a lot of knowledge in this part since it is really essential that you get both areas right.
Now go on and complete your bar with facing boards and go on to the top. You can use wood or stone to top your bar, it is all a matter of what you rather. If however, you are using a stone top, ask for a box inspection to ensure that your frame can hold up the weight of the stone top.Construct a shelf or two around 4 inches broad on the wall behind the bar as a exhibition shelf for your alcohol and your bar is finished.
Tips and Warnings
Guarantee there is sufficient space behind the bar for a cooler and whatever else you may want prior to when you build the bar; you do not want to make your bar just to see that the area is too small for a cooler as such confirm this first.The bar top ought to extend over the base by 1 foot on the patrons side and 11 inches on the servers side.
