subject: Configuring The D-link For Voip [print this page] In the Voice over IP system, the wireless router is one of the most important components. Aside from functioning as an access point, the broadband phone service VoIP router actual is used to allow access to internet connection without the conventional cable connections. Basically, it serves as an interface between the computer, the internet connection, and other access points.
In voice calls over the internet, these devices are very important. In fact, some telephony internet phone service providers are even very keen on the type of broadband router that you use. Although there are a number of these devices used in VoIP, some internet phone providers prefer using D-Link's DVG-1402S Broadband Phone Service VoIP Router. Aside from the fact that this router makes calling over the internet as easy as calling through the regular phone, this can also allow the connection of up to 4 computers in a single broadband connection. Indeed the DVG-1402S Broadband Phone Service VoIP Router is an all-around solution for personal, office, and business VoIP needs.
Configuring the DVG-1402S Broadband Phone Service VoIP Router is much simpler compared to other wireless routers. Instructions that are so easy to follow are provided by internet phone service providers. CallCentric is among those which provide a step-by-step configuration instruction for the DVG-1402S Broadband Phone Service VoIP Router. For as long as you follow these instructions, there is no reason why you would not be able to configure this D-Link router in no time at all.
One of the most important things to note in configuring this D-Link router is deciding whether this router will be used as a router, or behind an existing broadband router. This is so because there are different set-ups for either of the two functions of the DVG-1402S Broadband Phone Service VoIP Router. However different the starting set-up for the main function of the router though, the rest of the procedures are just the same for either of the two functions.
In accessing the web based management module though, you should remember that the default user name and password are supplied beforehand. Of course, you will be informed on the user name and password such that logging in would not be a problem at all. The rest of the instructions thoroughly guide you with the remaining configuration steps. As soon as configurations of the DVG-1402S Broadband Phone Service VoIP Router is done, the computer needs to be restarted.
As soon as the computer finishes rebooting, the phone attached to the router should be ringing in a little while. If the phone does not ring after about two minutes, you need to unplug the power and plug it back again after 10 seconds. This should do the trick. When the status light turns green already, and you can already start calling up family and friends anywhere in the world that is accommodated on the phone service that you have employed.
