subject: 4 Home Audio Wiring Tips [print this page] Help to implement the project the sound to leave the house wiring in often important tips that can make all the difference between the system and install exactly the wrong one. Simply following the instructions step by step in many cases is not enough because the technical project often involves techniques of small and nuance that can only come with practice or personal guidance. Based on some tips and techniques for home wiring sound scientific logic and some other products of common sense, which are seen to dramatically improve the quality of the production system.
Taking the potential needs in the future in mind while wires
When it put the home audio system alone, and one of the first considerations to take into account what needs you may have in the future. In case you are likely to choose to add the equipment in the future, which must be wired to the same system as well, and planning for the future can not be a big problem. This usually means the dismantling of the whole frame and start again. Instead of having to go back to square one, it is logical that the planning for the future, and leave spaces and opportunities to add the needs of growth. Not undo this way you only have to make adjustments and changes are small and large initial effort. For example, it is advisable to include some additional electrical sockets and outlets in the system can also use these new devices to power in the future.
Focus all the organs of the audio system in one room
Attempt such a scheme would be wired all the audio equipment that are in the network are stored in one room. Systems sub-woofer, speakers, LCD screen, speakers, music systems and computer accessories, etc., that all equipment is configured as part of the audio system, to the extent possible, be confined to one room and this makes it easier to arrange the EEG specifically. Save a similar category of devices spread through the house and put pressure on the overall electrical system and wiring can not be so flexible. Concentrated wire is easier to manipulate, and thus achieve the desired results more easily.
Reduce the negative impact of external disturbances on the quality of sound
Electrical wiring that can be adapted for use in the walls are best suited for audio systems. This is because these wires are more resistant to external influences, and therefore outside noise, disturbances and vibrations have little effect on the quality of the sound. Another way to combat the degradation of sound quality caused by external influences is the evolution of the wires together. This makes the power of the audio signal is passed more able to resist any trouble.
The use of short wire cables
Cables long and wise and strong audio signals fade with the passage of time and distance. If all the devices on the wire under the sound in one room and do not need a long cable special. As the maximum extent possible it is best to abide by the length of this ensures a minimum of stronger and more visible voice signals.
