subject: How To Make Stainless Steel Kitchen Work Tables [print this page] Making your own kitchen stainless steel table work quite a process, but the effort will pay off once you are able to work on the table. Remember, safety and attention to your base at a time working with your tools and sheet metal, and stay on well-being in mind. Also remember that once your table that you are working consistently with the food on the surface of the table, so make sure you clean the stainless steel properly after each session.
Tools and materials
* Paper stainless steel
* Plywood
* Wood Edging
* Table 4 legs
Liquid Nails *
* Screws
* Drill
* Gloves
Step 1 - Take your measurements and get your paper, metal,
Make sure that you have an idea of how large you want your table because you will be subject to contact local sheet metal to cut a piece of stainless steel for you. You want a paper of good quality since you will work with food. The size of your paper will be the same size as the base metal, plywood will buy. The size of each of what will be will be your top of the table. You can also use these measurements when buying and / or pieces of wood on ahead.
Step 2 - Get Your Articles
It should be thick plywood your enough so that screws will be used to connect the table legs will not go a very long time to penetrate through the right. There inch 1 / 2 to 4 / 3 of an inch and one done just fine as long as you have nails that are shorter. Wood tends to be to get fit also against the plywood and sheets of stainless steel because it will go against all of the layers. Oak edging to be completed is the preferred option because it will last longer under constant use and looks great. Legs when you choose your table to take account of the function. If you need to move frequently around the table, table legs, which buy wheels with the brakes on the base, otherwise, just buy the table legs standard.
Step 3 - Attach the iron and steel and wood grinding
Use what is called liquid nail (a strong glue) to melt stainless steel and paper to the plywood. It is always good to wear gloves while working with liquid nail it hard to get out of your hands. Be careful with this, because if the glue dries, and you will not be able to fix it and you start again. Wait until the glue dries and then use liquid nail glue wood tends to the negotiating table. Wait for it to dry before proceeding.
Step 4 - Attach table legs
The use of drilling and screws to attach the four legs to the bottom surface of the table. The safest way to do this is to transform the face to the bottom of the table so you can easily work with the bottom. Since you will use the surface for food, which should include everything that will be resting on the surface of the table with a clean cloth or plastic. Holes in the nails carefully because you do not want the plywood to the judiciary.
