subject: Restore Batteries - How To Revive A Battery [print this page] Batteries are very helpful these days, they are being used to power electronics, cars, gadgets and many other accessories, but one must remember that batteries does not last long. They have a battery life wherein they can only run for a period of time. How to revive a battery? Can they still be revived?
Yes it can still be revived. This may be applied to car, lead acid and deep cycle batteries. Usually a dead battery may not be able to charge or cannot hold a charge. It usually takes about a few days or weeks for a battery to be revived. Usually you need a battery charger; you need to have a high voltage battery in order to run a dead battery.
A dead battery undergoes the cycle of charge and discharge. Usually a battery becomes dead because of the accumulation of sulfate crystals, so what one should do is to dissolve the sulfate crystals using the cycle of charge and discharge.
Some uses battery life saving devices to run a dead battery together with a charger. Just make sure that the polarity is right enough. Try to charge the battery usually in a 12volt battery, up to the point of reaching the said amount or until fully charged. The 12 battery voltage will be your guiding point. If it goes below 9.5 then repeat the whole process charge and discharge.
If you try to do this process of charge and discharge for a few days, in about 5-14 days your battery will be revived. As long as you make use of a battery life saving device and charger, you will get your goal of having your battery back. How to revive a battery is just easy as long as you have the right materials and the right knowledge on how to do it.