subject: Pool Covers – Frequently Asked Questions [print this page] Author: saichon sannok Author: saichon sannok
In terms of performance (prevention of evaporation, heating and reduction) of the maintenance costs, 300, 400 and 500 microns are virtually the same. 300, 400 & 500 microns What is the difference? The "micron-weight" refers to the thickness of the substrate (instead of the "bubble" itself). This is the part of the cover that held the full force of UV light from the sun. In terms of performance (prevention of evaporation, heating and reduction) of the maintenance costs, 300, 400and 500 microns are virtually the same. Basically, it is only up to longevity. Covers with a larger micron weight can withstand more years after exposure to sunlight (before the lid) will eventually be replaced. This is due to different manufacturers warranty against time. http://www.abovegroundpools.bankcreditsite.com/pool-covers-frequently-asked-questions/ How should I measure my pool? Its only a matter of measuring the longest and widest points Another way to think about that "What would be the whole box, attach area. You only needthe water and / or weight (or choose the next size up) form our selection of menus. Why did you cut the cover 75mm outside the waterline? Cut the cover off the water line 75mm means that the lid-curl slightly at the pool wall (but not) about the handling. This excessive size and the resulting up-curl prevents the wind to fish exposed edges. Have actually installed this way, the effect of the wind rustling through the pool to create, downPressure, which pushes the cover on the water. Given the suggested I trim the ceiling so that it is ultimately a bit oversized, and I need to allow them in the selection of sizes? No you simply choose dimensions that match your pool, the maximum length and width (or the number is greater) from the list of our standard sizes. http://www.abovegroundpools.bankcreditsite.com/pool-covers-frequently-asked-questions/About the Author:
