subject: How to Manage Swimming Pool Chemicals [print this page] Author: saichon sannok Author: saichon sannok
The most important element of the swimming pool maintenance monitoring and maintaining the proper water chemistry. While the leaves many people confused, it's really not that complicated. The first step of the process is to regularly test the water. During the summer months, they were implemented, either daily or every other day. In winter, you can probably come with once a week. If you have a regular schedule for the examination of water and adjusting the chemical balance in line;it should require a minimum of time. However, if you neglect the job, you run the risk of the growth of algae, and possible damage to your pool and equipment. Learn the following basics will help you avoid costly repairs and cleaning difficult. Chlorine This is an everybody knows. Chlorine is the chemical that purifies the water, kills bacteria and prevents algae growth. Pool chemistry is measured in parts per: Millions of gallons of water that yousee abbreviated (PPM). The desired chlorine range is between 0.5 and 3,0 ppm. If levels fall within this area, you run the risk of discolored, cloudy water and algae growth. When above the acceptable range, the water can cause irritation of the eyes and skin. Adding chlorine, the water is normally done with tablets or granular chlorine with the aid of an automatic inline chlorinator. There are also floating chlorine gas, but the in-line models are due to the possibility of the amounts that are better regulatescattered. Occasionally it will be necessary to shock or super chlorinate the water. This is done as a preventative measure against algae and bacteria. How often will you need to do this depends on the amount of use and be dependent on the weather. When shocking the pool, so that the chlorine level to normal before the float back. During the summer months and warm temperatures, chlorine is rapidly consumed by the heat and sunlight. It is important to keep in regular intervals, because the waterColor rapidly when the level to drop and if it is, it will be a lot of work to take to retrieve it.http://www.abovegroundpools.bankcreditsite.com/how-to-manage-swimming-pool-chemicals/
PH This is the acidity of the water. When examining the pH of the allowable range is 7.2 to 7.6 PPM. PH is the most important element of pool water chemistry, because it may be the impact can cause the other elements and the possible damage. Low pH can produce high acidity of the water that cause corrosion of metallic components, etching of plaster andStaining. Having low pH is the most common cause of accelerated burning of the eyes and the burning of chlorine. High pH limits the effectiveness of chlorine and can cause cloudy water. To add the pH value, hydrochloric acid, to pour the water from below the rim of the pool. Be sure to keep himself from ladders or other metal parts by the highly corrosive nature. It's a good idea, then the pool brush to keep the acid from settlement to the frills and trimmings. ThePH, by soda (sodium bicarbonate) can be raised. Chemicals should always be taken according to the manufacturer's instructions and safety data sheets. http://www.abovegroundpools.bankcreditsite.com/how-to-manage-swimming-pool-chemicals/About the Author:
