subject: Tips On How To Measure For New Curtains [print this page] Curtains are quite essential in terms of interior decoration of any part of the house. They are not only practical to use but also guard your privacy as well. Curtains give an aesthetic touch to your house or room. Therefore, one is required to take particular care to make and select the appropriate option for curtains.
The width of the curtains and the rod should be wider than the window frame so that the curtains can be opened properly. Four inches above the apex of the window border is the preferred position to hang the curtains horizontally. It is sensible to sketch a drawing of every window and copy all the measurements on it to refer to in for future.
These measurements would surely ensure a picture perfect frame effect that would further enhance the window trim with any sort of colour and fashion. Do not overlook the position of the tension rods in any case. When to come to an outside hanging, the most appropriate thing to do is to measure the external edges of the wood trim all the way down to the base.
This style has been getting popular for some time and it would be best to cover most of the trim if this option is selected on a rod pocket or a tab style curtain. The length of the curtain should always be about four to six inches longer. The tiebacks would also imply more of a limitation. Curtain fullness can also be regarded as another factor of resolving the matter.
With regard to the particular dimension, the fullness of the curtain is approximately one and a half to twice the breadth of the window. Therefore the reality of the measurement depends on the style of the curtains as well. In cases like buttoned up curtain and valances that have a detailed border is that they are less than conventional in fullness.
After you are done with the mounting style, you can easily concentrate of the width that would be required for the curtain. Another factor that needs to be considered, is taking the correct measurements. This would be the length of the curtains that depends immensely on the style that you would prefer for your curtains. Length can be easily determined by your personal preference.
If you want your curtains to be floor height, then you should measure from the rod to an inch above the floor carpeting. If you have a custom rod that has balls, decorative clips or finials, you can measure the width by starting from the start of the clip on the left side to the end of the clip on the right side. It is important not to include the decorative finials and balls to your measurement.
Measuring curtains can be very tricky but you need to take care and follow the aforementioned tips and instructions so that the desired result is achieved.
