subject: Avoid Repair Bills: Fix Your Air Conditioner By Yourself [print this page] There could be times when you experience problems with your air conditioning unit, and you don't really know what you should do. But before you phone up the air conditioning repair company, try a few basic steps on your own. These moves can potentially save you a great deal of money in repair bills. Keep reading for some troubleshooting tips to help you discover the problem and how you can repair it.
According to what the problem is, there are various things to check for. If your system won't run at all, there could be a problem with the power or the settings. For starters, you will want to make sure there is actually power being provided to the equipment. Locate the power connection and test it. If that wasn't the problem, take a look to make sure that all the buttons and knobs are set to the right setting. It's astonishing how these basic steps have saved many people from calling in an air conditioning repair contractor.
Or you might discover that air is being distributed by your air conditioning unit, but it's not cold air. In this case then there are several things that might be the problem. First of all, check to see how much air is passing through the unit. If the air stream is weak, there may be a problem involving the blower or the duct system.
Next, check the condition of the blower unit. If it has a buildup of dirt and dust, this likely means that the blower is turning but can't get any air circulating. Simply take it out, clean it up, and then replace it. You might be able to avoid spending a lot of money with just this basic action.
Something else that could cause problems with air flow is when the ducts and filters aren't clean. Locate the filter, take it out, and put in a fresh one. This is one more simple thing which you can accomplish by yourself and which costs very little.
If it all appears to be clean, have a look at the ducts to make sure that they are connected properly and clear of any debris. Shine a flashlight down into them. If it's dark in the room you will be able to see light shining through. But you should be able to see the separation easily if it's an obvious leak.
Ice on the compressor unit is another reason for problems with cooling. This is also something you can deal with by yourself. Switch off the unit and allow it to warm up. The ice will melt right off. Before you switch the air conditioner back on, make sure that all of the ice is entirely melted.
