subject: How to maintain garage roller shutter doors [print this page] How to maintain garage roller shutter doors
1.Preliminary examination
Before undertaking any maintenance work on garage roller shutter doors, you should first check all the different elements of the door. Including parts like springs, cables and rollers. Before using garage roller shutter doors again, be sure that any broken orimpaired elements are replaced. Almost allminor repairs can be repaired after a quick trip to your local D.I.Y store, but larger jobs must be carried out by an expert, or may need the garage roller shutter door being changed.
2.Lubricate
For garage roller shutter doors to work most effectively you will need to lubricate all moving elements often, for instance, once every 3 months. The most effective way to lubricate garage roller shutter doors would be to buy an aerosol spray lubricant along with a wand to clean the small pieces in advance of spraying them.
Nevertheless, do check which elements you're lubricating before hand.
3.Weather resistant
Although garage roller shutter doors are made to perfectly fit the doorway of your garage, there'llstill be a very small gap in between the garage door and door frame. Although this gap is minute it's going to act to suck all of the heated air out of your garage.
Use weather strip protection, a slim strip of rubber material, to make a seal each and every time the garage door is closed. Over a period of time the weather stripping can dry and crack, therefore permittingthe air to escape yet again. Weather stripping can be purchased from any local hard ware store and may be easily fitted by anybody.
4.Paintwork
It is necessary that you keep your paintwork looking its very best as this is definitely the most informing indication that a garage roller shutter door is old. If your paint is chipping or peeling simply use a piece of coarse sand paper, making sure thatthe surface is incredibly smooth.
As it is very hard to match up paint it's going to be far better to repaint the entire surface. However, previous to performing any painting, fully clean the outside of the garage roller shutter door. This may make sure nobits of dirt or dust will get mixed up with the paint and ruin the final outcome. For that reason, prime the entire surface area of the garage door so the final coat of paint sticks. Allow the primer to totally dry before applying the last outer layer.
