subject: Getting The Right Kind Of Plumbing Repair For Your Garbage Disposal [print this page] Your garbage disposal is a part of the plumbing system that sometimes can have problems. Although it's easy to get rid of the unwanted wastes found in it, you still get frustrated when the device itself breaks down. However, repairing your garbage disposal is not as difficult as you think it is. You can actually fix it on your own with ease. Let's learn the ways on how to fix your garbage disposal.
Before you get down into the business of repairing your disposal, you must know the dos and don'ts of it. Remember that the disposal has a motor and a blade underneath the drain which you must be aware of. So, you must be careful first by unplugging all parts before you do the repairing process.
First, you need to check your disposal for whatever is causing the damage that you need to repair. It may be due to clogs or leaks. You also check if the circuit breakers have tripped or the flywheel has been stuck.
To repair clogs or leaks, you only need to remove any debris that is causing the blockage or tighten all connections to prevent leakage. Sometimes there is a call to replace the pipes because there are clogs that cannot be removed. And to make sure there will be no more leaks, you replace the seal and the drain gasket.
If the problem is due to the circuit breakers or the flywheel, you only need a few certain steps to fix it. For the circuit breakers, check if the panels have been turned off and if so just flip the switch and reset the disposal. If it's due to the flywheel, you have to apply a hex wrench and rotate it until the flywheel is loosened.
These are the things you must do to fix your garbage disposal. Take note that you have to check first what is causing the problem so you will be able to easily fix it. And most importantly, remember to stay careful at all times whenever you repair the problem.
Getting The Right Kind Of Plumbing Repair For Your Garbage Disposal
