subject: Steel And Malleable Iron Pipe Fittings [print this page] Steel and malleable iron pipe fittings steel pipe with threaded connection, if the working pressure is high (but less than 1.6Mpa), can use steel pipe fittings.
Steel pipe fittings made of carbon steel, commonly known as wrought iron pipe fittings. Its solderability and can be used where needed welding, such as steel pipe connected to the hoop often as boilers or water tanks steel
Device. 3. Sharp bend
Water supply cast iron pipe fittings from the gray cast iron casting, the water supply cast iron pipe fittings have bearing socket type and flange disc two, its use and malleable pipe similar to the following main types: 10
Words tube, T-tube (including the three bearing cross tube, three cross tubes, 4 bearing cross tubes, 4 Cross tube, two-bearing T-tube, double-disc T-tube, three-bearing T-tube, three T-tube, two-bearing single plate T-tube, single
Cheng Double Disc T-tube); 90 bend, 45 elbow; fork tube; b word management; hydrant pipe; casing so.
Cast iron drainage pipe fittings mainly socket bent tube, 90 elbow, 45 Y-shaped links, 90 T-shaped links, 90 TY-shaped links, oblique cross, is Stone, TY Reducing three links form , Reducing Cross, tube
Hoop, T-shaped bottle links, 45 bend, Y-shaped Reducing three links, socket to remove port, S-shaped trap, P-shaped deposit is not bending, floor drain and other varieties.
Note: a variety of connector pipe fittings made of different materials can be taken now, plastic fittings pipe fittings are widely used, because only with a different material, not repeat them here.
