subject: The Choice Of Lining [print this page] Lining fabric to set off to improve the feel and drape, making clothing with perfect shape. Also hair interlining of the garment interlining with the use of local parts of the role of reinforcement.
The physical properties interlining thickness, elastic hair interlining, interlining hot solid temperature, the pressure required for hair interlining hot solid. Nonwoven interlining, woven interlining varying degrees of thickness, fabric hair interlining with the same thickness is difficult to measure, can only be visual, sensory judge, usually classified as thin hair interlining thickness, the thickness of three types. There are two stretch woven interlining, an elastic yarn is woven interlining materials inherent resilience, the other is the warp and weft yarn weaving the two systems there exists the gap due to tensile stretch, non-woven interlining The elastic is non-woven hair interlining material itself has the stretch. Hot solid hair interlining viscose hair interlining temperature is heated to melt temperature, usually have high interlining interlining, hair interlining two low temperature. Burning of the fabric lining strong degree and solid hair interlining hot temperature, the pressure required for hair interlining hot solid, ironing link between the length of time, usually the pressure of high temperature hair interlining relatively large solid iron, ironing time is relatively long, low contrast the pressure of hot solid hair interlining relatively small, ironing time is relatively short.
Select hair interlining should consider the following aspects:
First, the characteristics of clothing:
Different in different parts of clothing and apparel, on the hair interlining of the requirements are different, select the hair interlining should be fully taken into account the characteristics of clothing. Shirts and blouses should use polyethylene (PE) coating the shirt backed, washable superior performance. Men's suits, jackets should be used polyamide (PA) coating coat hair interlining, its resistance to dry cleaning superior performance. PA high-end washing powder may also be appropriate, fashion, silk garments should be selected PA or PES (polyester) coating of the thin soft-type fashion hair interlining. (If you need to sand wash clothing after clothing, coating the hair interlining should be used PES).
Second, the fabric properties:
As the fabric of the fabric, the basic components of the fiber and finishing conditions vary, the adhesion process in heat shrinkage rate, shrinkage and color when hot pressure situation is different, we should choose the same material properties ( or similar) in the hair interlining to match the bond with the fabric. The flexible fabric, should choose a flexible hair interlining with compatibility (Note: when the hair interlining of the elastic adhesive to the same direction). To select the high-light mesh fabric, less coating the hair interlining, so that when the transparent adhesive glue, and some require the same or similar thin fabric hair interlining color matching, so that through the color. Heavy or latitude and longitude lines twist the fabric to enhance the general select number of smaller projects, a higher coating amount of interlining to ensure adequate adhesion after peeling.
The third is the designer's intent and the current prevalence:
There are several possible the same fabric hair interlining to match, as to which type of hair interlining, should give full consideration to the intention of fashion designers and the current epidemic, according to hair interlining the thick, hard and soft feel, and flexibility to choose.
Finally, quality, price, performance ratio:
The same type of hair interlining, and sometimes there are several quality grades. Customers can refer to the actual situation according to their quality, price performance ratio, determine the choice of a hair interlining.
