subject: The Manufacturing Process Of Beverage Production [print this page] The Manufacturing Process The Manufacturing Process
Most soft drinks are made at local bottling and canning companies. Brand name franchise companies grant licenses to bottlers to mix the soft drinks in strict accordance to their secret formulas and their required manufacturing procedures.
Clarifying the water
* The quality of water is crucial to the success of beverage production line . Impurities, such as suspended particles, organic matter, and bacteria, may degrade taste and color. They are generally removed through the traditional process of a series of coagulation, filtration, and chlorination. Coagulation involves mixing a gelatinous precipitate, or floc (ferric sulphate or aluminum sulphate), into the water. The floc absorbs suspended particles, making them larger and more easily trapped by filters. During the clarification process, alkalinity must be adjusted with an addition of lime to reach the desired pH level.
Filtering, sterilizing, and dechlorinating the water
* The clarified water is poured through a sand filter to remove fine particles of floc. The water passes through a layer of sand and courser beds of gravel to capture the particles.
* Sterilization is necessary to destroy bacteria and organic compounds that might spoil the water's taste or color. The water is pumped into a storage tank and is dosed with a small amount of free chlorine. The chlorinated water remains in the storage tank for about two hours until the reaction is complete.
* Next, an activated carbon filter dechlorinates the water and removes residual organic matter, much like the sand filter. A vacuum pump de-aerates the water before it passes into a dosing station.
Mixing the ingredients
* The dissolved sugar and flavor concentrates are pumped into the dosing station in a predetermined sequence according to their compatibility. The ingredients are conveyed into batch tanks where they are carefully mixed; too much agitation can cause unwanted aeration. The syrup may be sterilized while in the tanks, using ultraviolet radiation or flash pasteurization, which involves quickly heating and cooling the mixture. Fruit based syrups generally must be pasteurized.
* The water and syrup are carefully combined by sophisticated machines, called proportioners, which regulate the flow rates and ratios of the liquids. The vessels are pressurized with carbon dioxide to prevent aeration of the mixture.
* Carbonation is generally added to the finished product, though it may be mixed into the water at an earlier stage. The temperature of the liquid must be carefully controlled since carbon dioxide solubility increases as the liquid temperature decreases. Many carbonators are equipped with their own cooling systems. The amount of carbon dioxide pressure used depends on the type of soft drink. For instance, fruit drinks require far less carbonation than mixer drinks, such as tonics, which are meant to be diluted with other liquids. The beverage is slightly over-pressured with carbon dioxide to facilitate the movement into storage tanks and ultimately to the filler machine.
* The finished product is transferred into bottles or cans at extremely high flow rates. The containers are immediately sealed with pressure-resistant closures, either tinplate or steel crowns with corrugated edges, twist offs, or pull tabs.
* Because soft drinks are generally cooled during the manufacturing process, they must be brought to room temperature before labeling to prevent condensation from ruining the labels. This is usually achieved by spraying the containers with warm water and drying them. Labels are then affixed to bottles to provide information about the brand, ingredients, shelf life, and safe use of the product. Most labels are made of paper though some are made of a plastic film. Cans are generally pre-printed with product information before the filling stage.
* Finally, containers are packed into cartons or trays which are then shipped in larger pallets or crates to distributors.
Quality Control
beverage production line manufacturers adhere to strict water quality standards for allowable dissolved solids, alkalinity, chlorides, sulfates, iron, and aluminum. Not only is it in the interest of public health, but clean water also facilitates the production process and maintains consistency in flavor, color, and body. Microbiological and other testing occur regularly. The National Soft Drink Association and other agencies set standards for regulating the quality of sugar and other ingredients. If soft drinks are produced with low-quality sugar, particles in the beverage will spoil it, creating floc. To prevent such spoilage, sugar must be carefully handled in dry, sanitized environments.
It is crucial for soft drink manufacturers to inspect raw materials before they are mixed with other ingredients, because preservatives may not kill all bacteria. All tanks, pumps, and containers are thoroughly sterilized and continuously monitored. Cans, made of aluminum alloy or tin-coated low-carbon steel, are lacquered internally to seal the metal and prevent corrosion from contact with the beverage. Soft drink manufacturers also recommend specific storage conditions to retailers to insure that the beverages do not spoil. The shelf life of soft drinks is generally at least one year.
The $27 billion dollar soft drink industry generated about 110 billion containers each year in the early 1990s. About half of soft drink containers were aluminum cans and the other half, about 35 billion, were PET plastic bottles. Nearly 60% of all soft drink containers were recycled, the highest rate for any packaging in the United States. Environmental concerns continued to lead to improvements and innovations in packaging technology, including the development of refillable and reusable containers.
The Future
In the 1990s there were more than 450 types of soft drinks on the market and new flavors and sweeteners are developed all the time to meet market demands. In the future, advanced technology will lead to greater efficiency of soft drink production at all stages. New methods of water clarification, sterilization, and pasteurization will improve production and minimize the need for preservatives in soft drinks. Concerns with consumer health, safety, and the environment will continue to have a positive impact on trends in the soft drink industry.
