subject: Weber Char Broil Grill Parts and Their Uses [print this page] Many more Americans are into recycling these days and saving something that is older is a good idea. There are now several different Weber Char Broil Grill Parts offered in order to replace parts that are either broken or not functioning properly due to the wear and tear of time. These pieces that will save a grillers machine from the landfill can be found online or in special hardware stores.
Many of the gas grills need to have their heat plates replaced more often then other items. There is a Heat Plate #7000045 for the Char-broil grill that measures approximately 11 3/4" x 5 5/8" that can be traded for one that the factory installed that could have been worn over time and does not heat anymore. These are sometimes referred to as 'flame tamers' with some models having three and some having four to heat a good meal. Some companies will discount a box of additional units.
The CBHP1 Char-broil S/S Heat Plate also measures 11 3/4" x 5 5/8". This is a stainless steel style heat plate and will go along with several of the different burners. They are sold in four packs and used in the Performance and Advantage series of charbroil grills. The top of this replacement heating element is stainless steel and will last for a long time.
Another component that grill owners need quite often is Char-Broil burner carryover tube part number 7000277 that will fit over burners CBP1 and CBPCI as well as the heat plate or flame tamer 700045. One other unit this carryover burner tube could be used on is the Char-broil Performance grill 461350805 model.
There are also cooking pieces that will help to enhance the experience of grilling. These additional cooking units come in several different sets; some can be substituted for models 80005665 and 80005724. These cook grids are a two piece set and together measure 18 1/4" x 26 1/4" with each piece measuring 18 1/4" x 13 1/8". These cooking units will also fit the Thermos, Kenmore and Uniflame brands of outdoor grilling machines.
The number 7000181 Char-broil warming rack comes in handy when an individual wants to keep their meats warm when the rest of the dinner is being prepared. There are over 31 Performance models this rack for warming will adapt to and two different models for the Advantage series grillers.
Many times the legs are too small on Char-broil grill and they could use a 'lift'. This would be possible with leg extenders, in sets of two, model number 7000230. These leg extenders are used in over 45 different models in the Performance series and four different models in the Advantage grillers.
There are so many different Weber Char Broil Grill parts for various unique grilling machines that for a good fit, it is important for one to check with the owners manual first. Some of the replacement pieces are needed because the machines have been used over and over again, which is a good thing. There are other times new piece to the barbeque machine is required because of damage due to wind, rain or other natural type storms if the machines are left out in the elements.
