subject: Double Brass Copper And Aluminum Composite Airfoil Optimization Radiator [print this page] Radiator cooling capacity not only to copper diameter, but also with the aluminum wing height, spacing about. Heat capacity of aluminum wing with the wing height, the aluminum wing at first a rapid increase of the heat, but the increment gradually smaller, finally reaching an asymptotic value. This reflects the high degree of wing to a certain extent, if at the height of the wing continues to increase, increase very little heat, it will lead to reduced efficiency of the wing. This is a metal heat radiator dimensions intensity decreased with the increase of the reasons first. This analysis obtained by calculating the optimal shape and size is 75 90. From an economic point of view, this article will best brass copper and aluminum composite airfoil double radiator and optimal single brass copper and aluminum composite airfoil compared radiator, double brass copper and aluminum obtained composite airfoil of each radiator W brass radiator cost than copper and aluminum composite airfoil single radiator down 22.1%. Which prove that the copper radiator copper aluminum composite airfoil has economic advantages. These results can guide the production of radiators. This article also supply and return water temperatures on the different amount of the experimental results of thermal testing, drawn copper and aluminum composite airfoil double brass radiator heating at low temperatures, its thermal performance standards for the relative backwater when little change. The resulting low temperature heating such a radiator is also an advantage.
Double Brass Copper And Aluminum Composite Airfoil Optimization Radiator
